ONKYO TX-NR509 Benutzerhandbuch

En

■

Confirm the connection and settings.
1. Connect the HDMI OUT jack to the HDMI input 

jack of the TV.

2. Connect the audio output from the TV to the 

OPTICAL IN 2 jack of the AV receiver using 
an optical digital cable.

• When the audio return channel (ARC) function is used 

with an ARC capable TV, this connection is not necessary 
(

3. Connect the HDMI output of the Blu-ray 

Disc/DVD player/recorder to the HDMI IN 1 
jack of the AV receiver.

• It is necessary to assign the HDMI input when connecting 

the Blu-ray Disc/DVD player/recorder to other jacks 
(

page 40). Do not assign the components connected to 

the HDMI IN to the TV/CD input at this time. Appropriate 
CEC (Consumer Electronics Control) operation can not be 
guaranteed.

Change each item in the “HDMI Setup” menu 
according to the following settings:
• HDMI Ctrl (RIHD): On
• Audio Return Ch (ARC): Auto

See details of each setting (

Blu-ray Disc/DVD player, etc.

AV receiver

TV, projector, etc.

DIGITAL AUDIO 
connection 
(OPTICAL)

HDMI 
connection

HDMI 
connection

Confirm the settings. 
1. Turn on the power for all connected 

components. 

2. Turn off the power of the TV, and confirm that 

the power of the connected components is turned 
off automatically with the link operation. 

3. Turn on the power of the Blu-ray Disc/DVD 

player/recorder. 

4. Start playback on the Blu-ray Disc/DVD 

player/recorder, and verify the following:
• The AV receiver automatically turns on, and 

selects the input to which the Blu-ray 
Disc/DVD player/recorder is connected.

• The TV automatically turns on, and selects the 

input to which the AV receiver is connected.

5. Following the operating instructions of the TV, 

select “Use the TV speakers” from the menu 
screen of the TV, and confirm that the audio is 
output from the speakers of the TV, and not from 
the speakers connected to the AV receiver.

6. Select “Use the speakers connected from the AV 

receiver” from the menu screen of the TV, and 
confirm that the audio is output from the 
speakers connected to the AV receiver, and not 
from the TV speakers.

• Perform the above operations when you use the AV 

receiver for the first time, when the settings of each 
component are changed, when the main power of each 
component is turned off, when the power cable is 
disconnected from the power supply, or when there has 
been a power outage.

Operate with the remote controller.
For buttons that can be operated (

• Audio from DVD-Audio or Super Audio CD may not 

output from the TV speakers. You will be able to output 
the audio from the TV speakers by setting the audio output 
of the DVD player to 2ch PCM. (It may not be possible 
depending on the player models.)

• Even if you set to output audio on the TV speakers, audio 

will be output from the speakers connected to the AV 
receiver when you adjust the volume or switch the input 
on the AV receiver. To output audio from the TV 
speakers, re-do the corresponding operations on the TV. 

• In case of a 

p connection with u and u audio 

control compatible components, do not connect the RI 
cable at the same time.

• On the TV, when you select anything other than the HDMI 

jack to which the AV receiver is connected, the input on 
the AV receiver will be switched to “TV/CD”.

• The AV receiver will automatically power on in 

conjunction when it determines it to be necessary. Even if 

the AV receiver is connected to an 

p compatible 

TV or player/recorder, it will not power on if it is not 
necessary. It may not power on in conjunction when the 
TV is set to output audio from the TV.

• Linked functions with the AV receiver may not work 

depending on the component model connected. Operate 
the AV receiver directly in such cases.