ONKYO TX-NR626 Benutzerhandbuch

a Main Menu
b Sub Menu
c Setting target
d Setting options (default setting underlined)

On the “Monitor Out” settings, you can select 
whether or not to have the video sources’ images 
output through the HDMI output.
If you connect your TV to HDMI output, “Monitor Out” 
setting is automatically set and composite video and 
component video sources are upconverted

*

 and 

output.

• See “The video and audio signal flow” (

) for 

charts showing how the “Monitor Out” and “Resolution” 
settings affect the video signal flow through the AV 
receiver.

■

`

Main:

Select this if your TV is connected to HDMI OUT 
MAIN.

`

Sub:

Select this if your TV is connected to HDMI OUT 
SUB.

`

Both:

Select this if your TVs are connected to HDMI 
OUT MAIN and HDMI OUT SUB. Video signals 
are output from both HDMI outputs at the 
resolution supported by both TVs.

• The “HDMI Through” setting is only available for the HDMI 

OUT MAIN jack (

).

■

`

Through:

Select this to pass video through the AV receiver 
at the same resolution and with no conversion.

`

Auto:

Select this to have the AV receiver automatically 
convert video at resolutions supported by your 
TV.

`

480p (480p/576p), 720p, 1080i, 1080p

Select the desired output resolution.

`

4K:

Select this for an output resolution four times 
that of 1080p. Depending on the resolution 
supported by your TV, it will result in either 3840 
× 2160 or 4096 × 2160 pixels.

You can specify the output resolution for HDMI OUT 
MAIN and have the AV receiver upconvert the picture 
resolution as necessary to match the resolution 
supported by your TV.

• You can see the picture by pressing ENTER to check the 

“Resolution” setting for HDMI OUT MAIN (excluding NET, 
USB and BLUETOOTH input source).

• With some TVs, video signals are processed in the same 

way as “Through” when this setting is set to “4K”.

• If the “Monitor Out” setting is set to “Sub”, this setting is 

fixed to “Through”.

• If the “Monitor Out” setting is set to “Both”, this setting is 

fixed to “Auto”.

*1

When signal is 1080p input at 24 frames per second, it 
will be 1080p output at 24 frames per second.

■

`

Yes 

`

a 

b 

d 

c 

Main Menu

Sub Menu

Composite video, 

component video

HDMI

HDMI

Composite video, 

component video