ONKYO TX-NR515 Benutzerhandbuch

While holding down the REMOTE MODE button to which you want to assign a 
code, press and hold down [DISPLAY] (about 3 seconds).
The REMOTE MODE button/Remote indicator lights.
On Integra products, button names are capitalized. For example, “Remote Mode” 
button and “Display” button.
Notes:

• Remote control codes cannot be entered for [RECEIVER] and the multi zone button.
• Only TV remote control codes can be entered for [TV].
• Except for [RECEIVER], [TV], and the multi zone button, remote control codes from any 

category can be assigned for the REMOTE MODE buttons. However, these buttons also work 
as input selector buttons, so choose a REMOTE MODE button that corresponds with the input 
to which you connect your component. For example, if you connect your CD player to the CD 
input, choose [TV/CD] when entering its remote control code.

Within 30 seconds, use the number buttons to enter the 5-digit remote control 
code.
The REMOTE MODE button/Remote indicator flashes twice.
If the remote control code is not entered successfully, the REMOTE MODE 
button/Remote indicator will flash once slowly.
Notes:

• The flashing element of the remote controller will differ according to your AV receiver’s model.
• The remote controller is preconfigured with remote controller presets of different components. 

By entering a code from the Remote Control Code list, you can activate the relevant preset for 
that component.

• When there are multiple codes related to one manufacturer, try and enter them one-by-one until 

it matches your component.

• Depending on the model and year of your component, compatibility is not guaranteed.
• With some models, the remote controller may not not work or its compatibility may be limited 

to part of the component’s functionality.

• Besides, it is not possible to add new codes to the existing remote controller presets.
• Though the provided remote control codes are correct at the time of printing, they are subject to 

change by the manufacturer.