ONKYO SR805 Benutzerhandbuch

 

55

 

With the supplied speaker setup microphone, Audyssey 
MultEQ XT can measure the number of speakers con-
nected, their sizes, crossover frequencies, and distances 
from the listening position and calculate the optimal 
speaker settings for you automatically.

Before using this function, connect and position all of 
your speakers.

 

To create a listening environment in which several 
people can enjoy your home theater simultaneously, 
Audyssey MultEQ XT takes measurements at up to eight 
positions within the listening area. 

 

■

 

This is the center position of your listening area, or 
the listening position if there’s only one listener.

 

■

 

These are the other listening positions (i.e., the 
places where the other listeners will sit). You can 
measure up to eight positions.

The following examples show some typical home theater 
seating arrangements. Choose the one that best matches 
yours, and position the microphone accordingly when 
prompted.

TV

TV

TV

TV

TV

TV

TV

TV

TV

:

:

Listening area

Listening position

Notes:
• If any of your speakers is 4 ohms, change the 

Speaker Impedance setting before running the 
automatic speaker setup (see page 45).

• If the AV receiver is muted, it will be unmuted 

automatically when the automatic speaker setup 
starts.

• Automatic speaker setup cannot be performed 

while a pair of headphones is connected.

• It takes about 15 minutes to complete the auto-

matic speaker setup for three positions. Total mea-
surement time varies depending on the number of 
positions and speakers.

• Do not disconnect the speaker setup microphone 

during the automatic speaker setup, unless you 
want to cancel the setup.

• Do not connect or disconnect any speakers during 

the automatic speaker setup.

+

-

TX-SR805_875_En.book Page 55 Thursday, April 26, 2007 3:00 PM