ONKYO TXNR727 Benutzerhandbuch

■

`

`

On 

When the “Loudness Plus” setting is set to “On”, it is 
possible to enjoy even subtle nuances of audio 
expression at low volume. This is only available when 
the THX listening mode is selected.

■

`

Yes 

`

If this setting is set to “Yes”, Dynamic EQ and 
Dynamic Volume have no effect in THX listening 
mode.

• This setting is fixed at “Yes” if “Loudness Plus” is set to 

“On”.

THX Loudness Plus
THX Loudness Plus is a new volume control 
technology featured in THX Ultra2 Plus™ and THX 
Select2 Plus™ Certified receivers. With THX 
Loudness Plus, home theater audiences can now 
experience the rich details in a surround mix at any 
volume level. A consequence of turning the volume 
below Reference Level is that certain sound elements 
can be lost or perceived differently by the listener. 
THX Loudness Plus compensates for the tonal and 
spatial shifts that occur when the volume is reduced 
by intelligently adjusting ambient surround channel 
levels and frequency response. This enables users 
experience the true impact of soundtracks regardless 
of the volume setting. THX Loudness Plus is 
automatically applied when listening in any THX 
listening mode. The new THX Cinema, THX Music, 
and THX Games modes are tailored to apply the 
proper THX Loudness Plus settings for each type of 
content.

With the Audio Adjust functions and settings, you can 
adjust the sound and listening modes as you like.

■

`

Main 

`

`

This setting determines which channel of a stereo 
multiplex source is output. Use it to select audio 
channels or languages with multiplex sources, 
multilingual TV broadcasts, and so on.

■

`

Left + Right 

`

`

This setting specifies the channel to be used for 
playing any 2-channel digital source such as Dolby 
Digital, or 2-channel analog/PCM source in the Mono 
listening mode.

`

Center:

Mono audio is output by the center speaker.

`

Left / Right:

Mono audio is output by the front left and right 
speakers.

This setting determines which speakers output mono 
audio when the Mono listening mode is selected.

• If the “Center” setting is set to “None” (

setting cannot be selected.

■

These settings apply to only 2-channel stereo 
sources.
If you’re not using any surround back speakers, these 
settings apply to Dolby Pro Logic II, not Dolby Pro 
Logic IIx.

`

`

Off 

With this setting, you can broaden the width of the 
front stereo image when using the Dolby Pro Logic IIx 
Music listening mode.

`

–3 to 0 to +3

With this setting, you can move the sound field 
forward or backward when using the Dolby Pro Logic 
IIx Music listening mode. Higher settings move the 
sound field backward. Lower settings move it forward.
If the stereo image feels too wide, or there’s too much 
surround sound, move the sound field forward to 
improve the balance. Conversely, if the stereo image 
feels like it’s in mono, or there’s not enough surround 
sound, move it backward.

`

0 to 3 to 7

With this setting, you can adjust the width of the 
sound from the center speaker when using the Dolby 
Pro Logic IIx Music listening mode. Normally, if you’re 
using a center speaker, the center channel sound is 
output from only the center speaker. (If you’re not 
using a center speaker, the center channel sound will 
be distributed to the front left and right speakers to 
create a phantom center.) This setting controls the 
front left, right, and center mix, allowing you to adjust 
the weight of the center channel sound.