ONKYO TXNR727 Benutzerhandbuch

■

`

Absolute:

Displayed range is Min, 1 to 99, Max.

`

Relative (THX):

Displayed range is –

QdB, –81dB to +18dB.

With this setting, you can choose how the volume level 
is displayed.
The absolute value 82 is equivalent to the relative 
value 0 dB.

• If the absolute value is set to 82, “82Ref” will appear on the 

display and the THX indicator will flash.

■

`

QdB (fully muted), –50dB to –10dB in 10 dB 

steps.

This setting determines how much the output is muted 
when the muting function is used (

■

`

Off, 50 to 99 (Absolute display)

`

Off, –32dB to +17dB (Relative display)

With this setting, you can limit the maximum volume.
To disable this setting, select “Off”.

■

`

Last, Min, 1 to 99 or Max (Absolute display)

`

Last, –

QdB, –81dB to +18dB (Relative display)

With this preference, you can specify the volume 
setting to be used each time the AV receiver is turned 
on.
To use the same volume level that was used when 
the AV receiver was turned off, select “Last”.
The “Power On Volume” setting cannot be set higher 
than the “Maximum Volume” setting.

■

`

–12dB to 0dB to +12dB

With this setting, you can specify the headphone 
volume relative to the main volume. This is useful if 
there’s a volume difference between your speakers 
and your headphones.

■

`

On 

`

This preference determines whether operation details 
are displayed on-screen when an AV receiver 
function is adjusted.
Even when “On” is selected, operation details may 
not be output if the input source is connected to an 
HDMI IN.

■

`

English, Deutsch, Français, Español, Italiano, 
Nederlands, Svenska

`

English, Deutsch, Français, Español, Italiano, 
Nederlands, Svenska, 

Русский язык, 中文

`

English, Deutsch, Français, Español, Italiano, 
Nederlands, Svenska, 

中文

This setting determines the language used for the on-
screen menus.

■

`

`

With this setting, you can set the time until the screen 
saver activates itself. Once active, the screen saver 
will go off and the screen will return to its previous 
state if the AV receiver is operated in any way.

■

`

10kHz/200kHz:

`

9kHz/50kHz:

Select the frequency step according to your 
area.

■

`

10kHz:

`

9kHz:

Select the frequency step according to your 
area.

For AM/FM tuning to work properly, you must specify 
the AM/FM frequency step used in your area. 

• When this setting is changed, all radio presets will be 

deleted.

■

`

Off 

`

Turn this setting on to allow 

p

-compatible 

components connected via HDMI to be controlled by 
the AV receiver (