ONKYO HT-R510 Benutzerhandbuch
47
Specifications
AMPLIFIER SECTION
VIDEO SECTION
TUNER SECTION
FM
AM
GENERAL
REMOTE CONTROL
Specifications and features are subject to change without notice. Power sup-
ply and voltage vary depending on the area in which the unit is purchased.
ply and voltage vary depending on the area in which the unit is purchased.
Continuous Average Power output (FTC)
All channels:
All channels:
100 watts per channel min. RMS at
8
8
Ω, 2 channels driven from 20 Hz
to 20 kHz with no more than 0.08%
total harmonic distortion.
total harmonic distortion.
Dynamic power output:
230 watts
×
2 at 3
Ω
170 watts
×
2 at 4
Ω
115 watts
×
2 at 8
Ω
Total Harmonic Distortion:
0.08% at rated power
0.08% at 1 watt output
0.08% at 1 watt output
IM Distortion:
0.08% at rated power
0.08% at 1 watt output
0.08% at 1 watt output
Damping Factor:
60 at 8
Ω
Input Sensitivity and Impedance
DIGITAL INPUT (OPTICAL 1, 2):
0.5 Vp-p, 75
Ω
DIGITAL INPUT (COAXIAL):
0.5 Vp-p, 75
Ω
LINE (CD, VIDEO 1, 2, 3, TAPE):
200 mV, 47 k
Ω
Multichannel Input
(DVD FRONT L/C/R, SURR L/R):
200 mV, 47 k
Ω
(SUBWOOFER):
36 mV, 47 k
Ω
Output Level and Impedance
Rec out (TAPE, VIDEO 1):
200 mV, 470
Ω
Pre out (SUBWOOFER):
1 V, 470
Ω
Frequency Response:
10 Hz to 100 kHz,
+1/–3 dB (Direct mode)
+1/–3 dB (Direct mode)
Tone Control
Bass:
±12 dB at 20 Hz
Treble:
±12 dB at 20 kHz
Signal-to-Noise Ratio:
CD/TAPE: 100 dB
(IHF-A, Direct mode)
(IHF-A, Direct mode)
Muting: –50
dB
Input Sensitivity and Impedance
VIDEO (DVD, VIDEO 1, 2, 3):
1 Vp-p, 75
Ω
S VIDEO (DVD, VIDEO 1, 2, 3):
1 Vp-p, 75
Ω (Y)
0.28 Vp-p, 75
Ω (C)
COMPONENT VIDEO 1, 2:
1 Vp-p, 75
Ω (Y)
0.7 Vp-p, 75
Ω (P
B
, P
R
)
Output Level and Impedance
VIDEO (VIDEO 1, 2, MONITOR):
1 Vp-p, 75
Ω
S VIDEO (VIDEO 1, 2, MONITOR):
1 Vp-p, 75
Ω (Y)
0.28 Vp-p, 75
Ω (C)
COMPONENT VIDEO OUT:
1 Vp-p, 75
Ω (Y)
0.7 Vp-p, 75
Ω (P
B
, P
R
)
Tuning Range:
87.50-108.00 MHz (100 kHz steps)
Usable Sensitivity
Mono:
11.2 dBf, 1.0 µV (75
Ω, IHF)
0.9 µV (75
Ω, DIN)
Stereo:
17.2 dBf, 2.0 µV (75
Ω, IHF)
23 µV (75
Ω DIN)
50 dB Quieting Sensitivity
Mono:
17.2 dBf, 2.0 µV (75
Ω)
Stereo:
37.2 dBf, 20.0 µV (75
Ω)
Capture Ratio:
2.0 dB
Image Rejection Ratio:
40 dB
IF Rejection Ratio:
90 dB
Signal-to-Noise Ratio
Mono: 76
dB
Stereo: 70
dB
Alternate Channel Attenuation:
55 dB
Selectivity: 50
dB
(DIN)
AM Suppression Ratio:
50 dB
Total Harmonic Distortion
Mono: 0.2%
Stereo: 0.3%
Stereo: 0.3%
Frequency Response:
30 Hz-15 kHz, –1.0 dB
Stereo Separation:
45 dB at 1 kHz
30 dB at 100 Hz-10 kHz
30 dB at 100 Hz-10 kHz
Tuning Range:
530-1,710 kHz (10 kHz steps)
Usable Sensitivity:
30 µV
Image Rejection Ratio:
40 dB
IF Rejection Ratio:
40 dB
Signal-to-Noise Ratio:
40 dB
Total Harmonic Distortion:
0.7%
Power Supply and Power Consumption:
AC 120 V, 60 Hz
5.2 A
Dimensions (W
×
H
×
D):
17-1/8"
×
5-7/8"
×
14-13/16"
435
×
150
×
376 mm
Weight:
21.8 lbs., 9.9 kg
Transmitter: Infrared
Signal range:
Signal range:
Approx. 16 ft., 5 meters
Power supply:
Two “AA” batteries (1.5 V
×
2)