ONKYO TXNR525 Benutzerhandbuch
Advanced Operations
En-47
■
Front
`
Small:
`
Large:
Select based on the cone diameter.
Note
• If the “Subwoofer” setting is set to “No”, this setting is fixed
to “Large”.
■
Center
`
Small:
`
Large:
Select based on the cone diameter.
`
None
Note
*1
If the “Front” setting is set to “Small”, the “Large” option
cannot be selected.
cannot be selected.
■
Crossover (Crossover Frequency)
This setting is advantageous for the speakers that
you specified as “Small” in
This setting is advantageous for the speakers that
you specified as “Small” in
. To get the best bass
performance from your speaker system, you need
to set the crossover frequency according to the size
and frequency response of your speakers.
to set the crossover frequency according to the size
and frequency response of your speakers.
`
40Hz, 50Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz,
120Hz, 150Hz, 200Hz
120Hz, 150Hz, 200Hz
Use the diameter of the smallest speaker in your
system when choosing the crossover frequency.
system when choosing the crossover frequency.
*
Choose the setting matching your speaker.
Note
• For a more accurate setting, look up the frequency
response in the manuals supplied with your speakers and
set accordingly.
set accordingly.
• Choose a higher crossover frequency if you want more
sound from your subwoofer.
■
Double Bass
`
On
`
Off
Turn this setting on to boost bass output by feeding
bass sounds from the front left, right, and center
channels to the subwoofer.
bass sounds from the front left, right, and center
channels to the subwoofer.
Note
• When the “Subwoofer” setting is set to “No” or the “Front”
setting to “Small”, this setting is fixed to “Off” (
• This setting is set to “On” automatically when the
“Subwoofer” and “Front” settings are set for the first time
to “Yes” and “Large” respectively.
to “Yes” and “Large” respectively.
Here you can specify the distance from each speaker
to the listening position so that the sound from each
speaker arrives at the listener’s ears as the sound
designer intended.
to the listening position so that the sound from each
speaker arrives at the listener’s ears as the sound
designer intended.
Note
• These settings are not available in either of the following
cases:
– A pair of headphones is connected.
– The “Audio TV Out” setting is set to “On” (
– A pair of headphones is connected.
– The “Audio TV Out” setting is set to “On” (
– “HDMI CEC (RIHD)” is set to “On” (
you’re listening through your TV speakers.
■
Unit
`
feet:
Distances can be set in feet. Range: 1ft to 30ft
in 1 foot steps.
in 1 foot steps.
`
meters:
Distances can be set in meters. Range: 0.3m to
9.0m in 0.3 meter steps.
9.0m in 0.3 meter steps.
(The default setting varies from country to country.)
■
Left, Center, Right, Surround Right, Surround
Left, Subwoofer
Left, Subwoofer
`
Specify the distance from each speaker to your
listening position.
listening position.
Note
• Speakers that you set to “No” or “None” in the “4. Sp Config
) cannot be selected.
Speaker cone diameter
Crossover frequency
Over 8 in. (20 cm)
40/50/60 Hz
*
6-1/2 to 8 in. (16 to 20 cm)
70/80/90 Hz
*
5-1/4 to 6-1/2 in. (13 to 16 cm)
100 Hz
3-1/2 to 5-1/4 in. (9 to 13 cm)
120 Hz
Under 3-1/2 in. (9 cm)
150/200 Hz
*
This setting is NOT set automatically by
Audyssey MultEQ
Audyssey MultEQ
®
Room Correction and Speaker
).
5. Sp Distance (Speaker Distance)
This setting is set automatically by
Audyssey MultEQ Room Correction and Speaker
Setup function (
Audyssey MultEQ Room Correction and Speaker
Setup function (