Pioneer VSX-709RDS Benutzerhandbuch
28
En
Displays & Controls
Front Panel
This illustration shows the VSX-709RDS model.
1
— OFF/ _ ON (Main power) button
If the button is OFF (
—), the power of the
receiver is shut off and the STANDBY/ON button
(3) on the receiver or the remote control do not
function. Pressing the button again will turn the
receiver ON (
(3) on the receiver or the remote control do not
function. Pressing the button again will turn the
receiver ON (
_) and the receiver enters the
standby mode. In the standby mode, you can
turn on the receiver using the STANDBY/ON
button (3) on the receiver or the remote control.
turn on the receiver using the STANDBY/ON
button (3) on the receiver or the remote control.
2 STANDBY indicator
Lights when the receiver is in standby mode
(note that the receiver consumes a small amount
of power (1 W) in standby mode).
(note that the receiver consumes a small amount
of power (1 W) in standby mode).
3
STANDBY/ON button
Switches the receiver between on and standby
(note that the receiver consumes a small amount
of power (1 W) in standby mode).
(note that the receiver consumes a small amount
of power (1 W) in standby mode).
4 TUNING SELECT button
Switches between station memory and
frequency select modes.
frequency select modes.
STATION (+/–) buttons
Selects station memories when using the tuner.
FREQUENCY (+/–) buttons
Selects the frequency when using the tuner.
5 CLASS button (see pages 44 – 46)
Switches between the three banks (classes) of
station memories.
station memories.
6 MEMORY button (see page 45)
Press to memorize a station for recall using the
STATION (+/–) buttons.
STATION (+/–) buttons.
7 RF ATT button (see p. 42)
Use to lower the input level of a radio signal that
is too powerful or contain interference thus
causing the receiver to distort
is too powerful or contain interference thus
causing the receiver to distort
8 CHARACTER/SEARCH button
(see p.45, 49)
Use to search for different program types in RDS
mode. It is also used to input station names.
mode. It is also used to input station names.
9 DIRECT button
Use to switch Direct playback on or off. This
mode bypasses the tone controls and channel
levels for the most accurate reproduction of a
program source.
mode bypasses the tone controls and channel
levels for the most accurate reproduction of a
program source.
0 BASS (+/–) buttons
Use to increase/decrease bass (within a range of
– 6 dB to 6 dB in 2 dB steps).
– 6 dB to 6 dB in 2 dB steps).
- Display (see page 34)
= TREBLE (+/–) buttons
Use to increase/decrease treble (within a range of
– 6 dB to 6 dB in 2 dB steps).
– 6 dB to 6 dB in 2 dB steps).