Pioneer VSX-820 Benutzerhandbuch

En

•

Center – Select LARGE if your center 
speaker reproduces bass frequencies 
effectively, or select 

SMALL to send bass 

frequencies to the other speakers or 
subwoofer. If you didn’t connect a center 
speaker, choose 

NO (the center channel is 

sent to the other speakers).

•

1

 – Select 

LARGE if your front 

height speakers reproduce bass 
frequencies effectively. Select 

SMALL to 

send bass frequencies to the other 
speakers or subwoofer. If you didn’t 
connect front height speakers choose 

NO.

•

Surr – Select LARGE if your surround 
speakers reproduce bass frequencies 
effectively. Select 

SMALL to send bass 

frequencies to the other speakers or 
subwoofer. If you didn’t connect surround 
speakers choose 

NO (the sound of the 

surround channels is sent to the other 
speakers).

•

2

 – Select the number of 

surround back speakers you have (one, two 
or none).

3

 Select 

LARGE if your surround 

back speakers reproduce bass frequencies 
effectively. Select 

SMALL to send bass 

frequencies to the other speakers or 
subwoofer. If you didn’t connect surround 
back speakers choose 

NO.

•

Subwoofer – LFE signals and bass 
frequencies of channels set to 

SMALL are 

output from the subwoofer when 

YES is 

selected (see notes below). Choose the 
PLUS setting if you want the subwoofer to 
output bass sound continuously or you 
want deeper bass (the bass frequencies 
that would normally come out the front and 
center speakers are also routed to the 
subwoofer). If you did not connect a 
subwoofer choose 

NO (the bass 

frequencies are output from other 
speakers). 

You return to the Manual SP Setup menu.

• If you have a subwoofer and like lots of 

bass, it may seem logical to select 

LARGE 

for your front speakers and 

PLUS for the 

subwoofer. This may not, however, yield the 
best bass results. Depending on the 
speaker placement of your room you may 
actually experience a decrease in the 
amount of bass due to low frequency 
cancellations. In this case, try changing 
the position or direction of speakers. If you 
can’t get good results, listen to the bass 
response with it set to 

PLUS and YES or the 

front speakers set to 

LARGE and SMALL 

alternatively and let your ears judge which 
sounds best. If you’re having problems, the 
easiest option is to route all the bass 
sounds to the subwoofer by selecting 
SMALL for the front speakers.

1 • You can only adjust the 

Front Height setting when Pre Out Setting is set to Height.

• If the surround speakers are set to 

NO, the front height speakers will automatically be set to NO.

2 You can only adjust the 

Surr. Back setting when Pre Out Setting is set to Surr. Back.

3 • If the surround speakers are set to 

NO, the surround back speakers will automatically be set to NO.

• If you select one surround back speaker only, make sure that additional amplifier is hooked up to the 

PRE OUT L (Single) 

terminal. 

VSX-820_UCSMXCN_En.book  44 ページ  ２０１０年４月１２日　月曜日　午後５時１９分