Sony STR-DN1010 Benutzerhandbuch

D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm

STR-DN1010

4-174-068-11(1)

Press 

V/v repeatedly to select “Auto Cal. 

Type”, then press 

.

If you have reposition your speaker, we recommend 
that you perform Auto Calibration again to enjoy the 
surround sound.

The size of a speaker (“Large”/“Small”) is 
determined by the low frequency characteristics. 
The measurement results may vary, depending on 
the position of the optimizer microphone and 
speakers, and the shape of the room. It is 
recommended that you follow the measurement 
results. However, you can change those settings in 
the Speaker Settings menu. Save the measurement 
results first, then try to change the settings if you 
want.

Full Flat
Makes the measurement of frequency from 
each speaker flat.

Engineer
Sets the frequency to one that matches that of 
the Sony listening room standard.

Front Reference
Adjusts the characteristics of all the speakers 
to match the characteristics of the front 
speaker.

Off
Sets the Auto Calibration to off.

Auto Cal. Type

Engineer

Front Reference

Off

Auto Calibration

Full Flat