Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Sony
  4. STR-DN2010
  5. Benutzerhandbuch

Sony STR-DN2010 Benutzerhandbuch

Download
Seite von 152
112
GB
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm
masterpage: Left
STR-DN2010
4-182-049-11(1)
2
Press 
V/v repeatedly to adjust the 
parameter, then press 
.
• OFF
• AUTO
The test tone is output from each speaker 
in sequence.
• L, C, R, SR, SB*, SBR, SBL, SL, LH, 
RH, SW
You can select which speakers will output 
the test tone. 
* “SB” appears when only one surround back 
speaker is connected.
3
Press 
V/v repeatedly to adjust the 
speaker level, then press 
.
To output test tone from 
adjacent speakers
You can output test tone from adjacent 
speakers so that you can adjust the balance 
between the speakers.
1
Press 
B/b repeatedly to select “Phase 
Noise”, then press 
.
2
Press 
V/v repeatedly to adjust the 
parameter, then press 
.
• OFF
• L/C, C/R, R/SL, R/SR, SR/SL, SR/SBR, 
SR/SB*, SBR/SBL, SB/SL*, SBL/SL, 
SL/L, L/SR, L/RH, LH/RH, LH/R
Lets you output the test tone sequentially 
from adjacent speakers.
 
Some items may not be displayed, 
depending on the setting of the speaker 
pattern.
* “SR/SB” and “SB/SL” appear when only one 
surround back speaker is connected.
3
Press 
V/v repeatedly to adjust the 
speaker level, then press 
.
To output the source sound 
from adjacent speakers
You can output the source sound from 
adjacent speakers so that you can adjust the 
balance between the speakers.
1
Press 
B/b repeatedly to select “Phase 
Audio”, then press 
.
2
Press 
V/v repeatedly to adjust the 
parameter, then press 
.
• OFF
• L/C, C/R, R/SL, R/SR, SR/SL, SR/SBR, 
SR/SB*, SBR/SBL, SB/SL*, SBL/SL, 
SL/L, L/SR, L/RH, LH/RH, LH/R
Lets you output front 2 channel source 
sound (instead of the test tone) 
sequentially from adjacent speakers.
 
Some items may not be displayed, 
depending on the setting of the speaker 
pattern.
* “SR/SB” and “SB/SL” appear when only one 
surround back speaker is connected.
3
Press 
V/v repeatedly to adjust the 
speaker level, then press 
.
When a test tone is not output 
from the speakers
• The speaker cords may not be connected 
securely. Check to see if they are connected 
securely and cannot be disconnected by 
pulling on them slightly.
• The speaker cords may have the short-circuit 
problem.
When a test tone is output from 
a different speaker than the 
speaker displayed on the TV 
screen
The speaker pattern to the connected speaker 
is not set up correctly. Make sure the speaker 
connection and the speaker pattern match.