Sony STR-DN2010 Benutzerhandbuch

D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm

STR-DN2010

4-182-049-11(1)

• Use a High Speed HDMI cable. If you use a 

Standard HDMI cable, 1080p, Deep Color 
(Deep Colour) or 3D images may not be 
displayed properly.

• We do not recommend using an HDMI-DVI 

conversion cable. When you connect an 
HDMI-DVI conversion cable to a DVI-D 
component, the sound and/or the image may 
not be output. Connect other audio cords or 
digital connecting cords, then set “Input 
Assign” in the Input Option menu when the 
sound is not output correctly.

• Before connecting cables, make sure to 

disconnect the AC power cord (mains lead).

• An audio signal input to the HDMI IN jack 

is output from the SPEAKERS terminals, 
HDMI TV OUT jack and PHONES jack. It 
is not output from any other audio jacks.

• Video signals input to the HDMI IN jack can 

only be output from the HDMI TV OUT 
jack. The video input signals cannot be 
output from the VIDEO OUT jacks or 
MONITOR OUT jacks.

• The audio and video signals of HDMI input 

are not output from the HDMI TV OUT jack 
while the GUI menu is displayed.

• When you want to listen to the sound from 

the TV speaker, set “Audio Out” to 
“TV+AMP” in the HDMI Settings menu 
(page 117). If you cannot play back multi 
channel audio source, set to “AMP”. 
However, the sound will not output from the 
TV speaker.

• DSD signals of Super Audio CD are not 

input and output.

• Be sure to turn on the receiver when the 

video and audio signals of a playback 
component are being output to a TV via the 
receiver. If you set “Pass Through” to 
“OFF”, video and audio signals will not be 
transmitted when the power is turned off.

• Audio signals (format, sampling frequency, 

bit length, etc.) transmitted from an HDMI 
jack may be suppressed by the connected 
component. Check the setup of the 
connected component if the image is poor or 
the sound does not come out of a component 
connected via the HDMI cable.

• Sound may be interrupted when the 

sampling frequency, the number of channels 
or audio format of audio output signals from 
the playback component is switched.

• When the connected component is not 

compatible with copyright protection 
technology (HDCP), the image and/or the 
sound from the HDMI TV OUT jack may be 
distorted or may not be output.

 

In this case, check the specification of the 
connected component.

• You can enjoy High Bitrate Audio (DTS-HD 

Master Audio, Dolby TrueHD), multi 
channel Linear PCM only with an HDMI 
connection.

• Set the image resolution of the playback 

component to more than 720p/1080i to 
enjoy High Bitrate Audio (DTS-HD Master 
Audio, Dolby TrueHD).

• The image resolution of playback 

component may need certain settings be 
made before you can enjoy multi channel 
Linear PCM. Refer to the operating 
instructions of the playback component.

• To enjoy 3D images, connect 3D-compatible 

TV and video components (Blu-ray Disc 
player, Blu-ray Disc recorder, “PlayStation 
3”, etc.) to the receiver using High Speed 
HDMI cables, put on 3D glasses, and then 
play back a 3D-compatible content.

• Depending on the TV or the video 

component, 3D images may not be 
displayed. Check the 3D image formats 
supported by the receiver (page 146).

• Not every HDMI component supports all 

functions that are defined by the specified 
HDMI version. For example, components 
that support HDMI, version 1.4, may not 
support Audio Return Channel (ARC).

• Refer to the operating instructions of each 

connected component for details.