Sony STR-DH510 Benutzerhandbuch
71
GB
Ad
ditional Inf
ditional Inf
o
rmation
There is no sound from one of the front
speakers.
speakers.
• Connect a pair of headphones to the
PHONES jack to verify that sound is
output from the headphones. If only one
channel is output from the headphones, the
component may not be connected to the
receiver correctly. Check that all the cords
are fully inserted into the jacks on both the
receiver and the component. If both
channels are output from the headphones,
the front speaker may not be connected to
the receiver correctly. Check the
connection of the front speaker which is
not outputting any sound.
output from the headphones. If only one
channel is output from the headphones, the
component may not be connected to the
receiver correctly. Check that all the cords
are fully inserted into the jacks on both the
receiver and the component. If both
channels are output from the headphones,
the front speaker may not be connected to
the receiver correctly. Check the
connection of the front speaker which is
not outputting any sound.
• Make sure you have connected to both the
L and R jacks of an analog component, and
not only to either the L or R jack. Use an
audio cord (not supplied).
not only to either the L or R jack. Use an
audio cord (not supplied).
There is no sound from analog 2
channel sources.
channel sources.
• Check that the INPUT MODE is not set to
• Check that the INPUT MODE is not set to
“AUTO” (page 52) and the “A. ASSIGN”
function is not used to reassign the audio
input of another source to the selected
input (page 53).
function is not used to reassign the audio
input of another source to the selected
input (page 53).
• Check that the INPUT MODE is not set to
“COAX” or “OPT”.
There is no sound from digital sources
(from COAXIAL or OPTICAL input jack).
(from COAXIAL or OPTICAL input jack).
• Check that the INPUT MODE is not set to
“ANALOG” (page 52).
• Check that the Analog Direct is not being
used.
• Check that the “A. ASSIGN” function is
not used to reassign the audio input of
another source to the selected input (page
53).
another source to the selected input (page
53).
• Set “ARC” to “ARC OFF” when no sound
is output from TV OPTICAL IN jack
during TV input (page 58).
during TV input (page 58).
The source sound input to the HDMI
jack is not output from the receiver or
the TV speaker.
jack is not output from the receiver or
the TV speaker.
• Check the HDMI connection (page 23).
• You cannot listen to the Super Audio CD
• You cannot listen to the Super Audio CD
by connecting HDMI.
• Depending on the playback component,
you may need to set up the component.
Refer to the operating instructions
supplied with each component.
Refer to the operating instructions
supplied with each component.
• Be sure to use a High Speed HDMI cable
when you view images or listen to sound
during Deep Colour (Deep color)
transmission.
during Deep Colour (Deep color)
transmission.
The left and right sounds are
unbalanced or reversed.
unbalanced or reversed.
• Check that the speakers and components
are connected correctly and securely.
• Adjust the level parameters using the
“- - - - - -” appears on the display.
• Check that your component is connected
to the COAXIAL or OPTICAL jack. If no
signal is input through the COAXIAL or
OPTICAL jack, “- - - - - -” appears on the
display and this is not a malfunction.
signal is input through the COAXIAL or
OPTICAL jack, “- - - - - -” appears on the
display and this is not a malfunction.
There is severe hum or noise.
• Check that the speakers and components
are connected securely.
• Check that the connecting cords are away
from a transformer or motor, and at least
3 meters (10 feet) away from a TV set or
fluorescent light.
fluorescent light.
• Move your audio components away from
the TV.
• The plugs and jacks are dirty. Wipe them
with a cloth slightly moistened with
alcohol.
alcohol.
continued