Behringer Xenyx 1002B Benutzerhandbuch
6
XENYX 1002B User Manual
Audio Connections
2.
output
For unbalanced use, pin 1 and pin 3 have to be bridged
1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)
2 = hot (+ve)
3 = cold (-ve)
input
1
2
3
1
2
3
Balanced use with XLR connectors
Fig. 2.1: XLR Balanced
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
ground/shield
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
ring and sleeve have to be bridged at the stereo plug.
Balanced ¼" TRS connector
ring
cold (-ve)
cold (-ve)
tip
hot (+ve)
hot (+ve)
Fig. 2.2: ¼" Balanced
Strain relief clamp
Sleeve
Tip
Sleeve
(ground/shield)
(ground/shield)
Unbalanced ¼" TS connector
Tip
(signal)
(signal)
Fig. 2.3: ¼" Unbalanced
shield
sleeve
sleeve
tip
tip
Fig. 2.4: RCA
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
ground/shield
Connect the insert send with the input and the
insert return with the output of the effects device.
insert return with the output of the effects device.
Insert send return ¼" TRS connector
ring
return (in)
return (in)
tip
send (out)
send (out)
Fig. 2.5: Insert cable