Cary Audio Design CAD 211 AE Benutzerhandbuch

Seite von 14
 
11
300B Tube Pin Layout 
 
The LARGE pair of 300B tube pins should be installed toward the front of the CAD 211 AE amplifier 300B 
tube sockets. LOOK CAREFULLY at the tube pins to be sure that you insert them correctly. It is possible to 
force the tube pins into the socket the wrong way if you are not careful! If you install the tube wrong you 
will probably damage the amplifier and the tube. This damage will not be covered by the manufacturers 
warranty for a new amplifier. If you have any doubts about this, have the 300B tube installed by your 
dealer. If you will look carefully at the pins and install the large pins to the front of the socket all will be 
fine! These 300B tube pin installation instructions are valid for the 211 AE only.  
 
 
300B Tube Socket Pin Layout in the CAD 211 Amp Chassis 
 
The LARGE pair of tube pins should be installed toward the front of the CAD 211 amplifier tube socket. 
LOOK CAREFULLY at the tube pins to be sure you insert them correctly. It is possible to force the tube pins 
to plug in the wrong way in the socket! PLEASE BE CAREFUL INSTALLING THE 300B TUBE! If you install the 
tube wrong it will certainly blow a fuse and it may damage the amplifier. Correct placement is easy after 
looking carefully at the pin sizes and the pin socket hole sizes in the tube socket.  
 
 
 
 
Front of the tube socket installed on the CAD 211 chassis