Atlas Sound EQM131 Benutzerhandbuch

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A.   •    TELEPHONE: (800) 876-3333   •   FAX: (800) 765-3435

©2006 ATLAS SOUND LP 

Printed in USA 

 

ATS002536 RevA 10/06 

PP 

Balanced signals can be accomplished by wiring the 1⁄4” as follows: Tip (+), Ring (–) & Sleeve (GND) plug 
Unbalanced 

1

⁄

4

" signals can be accomplished by connecting the Ring and Sleeve together.

Balanced signals can be accomplished by wiring the XLR Male and Female connectors as Pin 2 (+) , Pin 3 (–) 
and Pin 1 (GND). For unbalanced signals, connect Pins 1 & 3 together.

3.  RCA Input & Output Connectors 

Unbalanced signals are only available when using the RCA connectors.

This switch breaks or makes the electrical connection between circuit ground and chassis ground. If hum is 
audible, select the setting that eliminates the hum.

Match the AC mains select switch to the AC source available. 

Note: Make voltage selection prior to plugging in 

the unit.

Only replace fuse with 500mA 250V fuse.

Plug unit into AC source. 

Note: Make voltage selection prior to plugging in the unit. 

 

1

 

1

 

3

 

4

 

5

 

7

 

2

 

2

 

6

 

3