Amplifier Tech SUM100 Benutzerhandbuch

audio.com

PERFORMANCE SPECIFICATIONS

Gain:

28dB maximum, 0dB at 12 o’clock pot position

Nominal Levels:

+4dBu in, +4dBm out to 600 ohm balanced load

Peak Levels:

+24dBu in, +22 dBm out to 600 ohm balanced load

Noise 20kHz B.W.:

-90dBm maximum output

Harmonic Dist.:

.02% Max at Peak Level

20Hz to 20 kHz .005% max at Nominal Level

Frequency Resp.:

+.25dB, 20 to 20,000Hz

Crosstalk:

70dB minimum at 10kHz

Input Impedance:

Balanced, 40kohm bridging

Output Impedance:

Balanced, 40 ohms maximum Zs

Dimensions:

1.5"H by 5.5"W by 5.75"D; Weight: 1.5 Lb. Net

Connectors:

XLR (balanced input/outputs)

Power:

24VDC @ .07A, connector sleeve is positive

Power Supplies:

All units require 24VDC power supply, which is ordered separately.
Nanoamps can share a single supply-using loop thru DC cable (P/N 20602-1).
Do not exceed rated supply current

WA100-1:

Wall mount power supply (UL), 24VDC @ .4 amp, 115 VAC/60 Hz

WA100-2:

Tabletop power supply, 24VDC @ .4 amp, 230 VAC/50-60 Hz with IEC 320
male 3 pin AC input connector. User supplies matching AC line cord for local
power system

BBU100-1:

Battery Pack unit houses four 9V alkaline batteries (batteries not included).
Four-to-six-hour life

DC100-1:

DC to DC converter powers several units from 12VDC mobile and belt pack
batteries. Supplies 24VDC @ .2amp maximum

20602-1:

DC power cable assembly for looping the DC power between NanoAmps

DESK MOUNT KITS: 20617-501 Angled Desk Mount Base

20617-502 Angled Desk Mount Base and One Stacker (2 units high)

20617-503 Angled Desk Mount Base and Two Stackers (3 units high)

20617-504 Stacker (2 units high)

20617-505 Horizontal joiners for 2 units (side by side)

21075-501:

Rack mount system mounts three units in one rack