Lucent Technologies 585-210-940 Benutzerhandbuch

3

A “nonstandard” disk drive addition is one that cannot take advantage of 
advanced features of the 

olds setup scripts because the disk 

configuration is not standard. The procedure is as follows:

1. Turn off CMS. (From the command line, enter the

 cmsadm 

or

 

cmssvc 

command, and select the 

cms_run

 option. When the run

 

option menu displays, select

 Turn off cms

.)

2. Halt the system by entering the following command:

3. Install the new disk drives by plugging them into the appropriate 

empty drive slots.

Follow the instructions you received with the disk drives or with your 
basic system, or see the hardware installation or maintenance and 
troubleshooting document for your platform and version of CMS.

4. Reboot the system by entering the following command:

5. Determine the total amount of disk space available to /cms by 

entering the following command:

The system responds by displaying file system information for /cms. 
For example:

Check the response. Look for the “avail” figure for 

/cms (shown as 

“yyyyyy” in the example above). Record that figure here:

______________________

6. Partition the new disks. Follow the instructions in 

. Double check the partitioning 

before continuing.

#

/usr/sbin/shutdown

-y

-g0

-i0

ok

boot

-r

#

df

-k

/cms

Filesystem

kbytes

used

avail

capacity

Mounted on

/dev/md/dsk/d21

xxxxxxxx

9

yyyyyy

0%

/cms