Lucent Technologies 585-210-940 Benutzerhandbuch
Maintaining Mirrored Systems
CentreVu CMS Release 3 Version 8 Disk-Mirrored Systems
Replacing a faulty disk
71
Step 3: Detach the
submirrors
submirrors
3
To detach a submirror means to put it off line so you can access its
constituent disk drives. You detach a submirror with a
constituent disk drives. You detach a submirror with a
metadetach
command. The command is in the format:
metadetach
<metamirror>
<submirror>
where
<metamirror> is the mirror and <submirror> is the submirror to be
detached.
To continue our example, since c0t2d0 is part of d20, which is a submirror
of d21, the detach command would be as follows:
of d21, the detach command would be as follows:
If the faulty disk is a boot disk, a
metastat
command also shows the
disk as part of the d11 or d12 submirror. Be sure to detach both the
submirrors of which it is a member. For example:
submirrors of which it is a member. For example:
#
metadetach
d21
d20
d21: submirror d20 is detached
#
metadetach
d13
d12
d13: submirror d12 is detached
#
metadetach
d21
d20
d21: submirror d20 is detached