Panasonic SC-HTB550 Benutzerhandbuch

RQT9660

∫ Remote control code

When other Panasonic devices respond to this system’s 
remote control, change the remote control code on the 
main unit and the remote control.

≥ Turn off all other Panasonic products.
≥ Turn on the main unit.

Change the remote control code to code 2:
1

Aim the remote control at this system’s remote 
control sensor.

2

Press and hold [MUTE] and [

] on the remote 

control for more than 4 sec.

≥ All the indicators will blink for 10 sec when the code of 

this system is changed.

≥ The setting is maintained until it is changed again.

≥ If this system does not operate after changing the code, 

repeat steps 1 and 2.

≥ To change the remote control code to code 1, repeat the 

steps above, but replace 

[

] 

with [TV]. 

∫ To reduce the clear-mode dialog effect

When the dialog does not sound natural while the volume 
is set low, for example, It is possible to reduce the dialog 
enhancing effect as follows:
Press and hold [TV] on the remote control and followed by 
[s VOL] on the main unit for more than 2 sec.

≥ All the indicators will blink once when the clear-mode dialog 

effect is reduced.

≥ Even if clear-mode dialog effect is reduced, dialog effect 

level is still adjustable.

∫ To turn off VIERA Link “HDAVI 

When “HDAVI Control” compatible equipment does not 
work well with this system, for example, it is possible to 
turn off this function as follows:
≥ When VIERA Link is turned off the ARC function is not 

available. Be sure to connect the optical digital audio 
cable. (> 19)

1

Press and hold [MUTE] on the remote control 
and followed by [s VOL] on the main unit for 

more than 2 sec.

2

After the setting has changed, turn off all the 
connected devices and then turn them on 
again.

≥ All the indicators will blink once when VIERA Link “HDAVI 

Control” is turned off.

∫ To turn off the volume limitation

If a state of the lowered volume disturbs you every time 
this system turns on, for example, it is possible to turn off 
this function as follows:
Press and hold [MUTE] on the remote control and 
followed by [VOL r] on the main unit for more than 2 sec.

≥ All the indicators will blink once when the volume limitation 

is turned off.

The settings of the clear-mode dialog effect, VIERA Link 
“HDAVI Control”, and the volume limitation remain intact even 
if you switch this system to standby mode. To turn these 3 
functions back on, this system must be set back to the factory 
preset. (> 28)

RQT9660~Body_mst.fm  Page 27  Monday, March 5, 2012  12:23 PM