MK Sound K-17 Benutzerhandbuch

OUTLINE OF SPEAKER CABINET

5"

7/8"

CENTER OF CABINET AND WALL STUD

WALL BRACKET

MOUNTED UP

DRILL 3/32" PILOT HOLES HERE

(FOR WALL ANCHORS, DRILL 1/8" HOLES)

1. 

If possible, we recommend mounting the  

 

wall bracket to a wall stud.  If you are using  

 

a stud,  locate the center of the stud.

2. 

Place this template on the wall and using a  

 

carpenter's level adjust the template until  

 

the top line is level.  If you are mounting  

 

the bracket to a wall stud, line up the    

 

bracket holes with the center of the stud.

3. 

Tape this template to the wall, on all four  

 

corners and recheck to make sure it is still  

 

level. Readjust the template if necessary.

4.  

If you are mounting the bracket to a wood  

 

stud, drill two 3/32" pilot holes.

5.  

If you are mounting the bracket with the  

 

plastic anchors, drill two 1/8" holes per  

 

bracket. (Use the plastic anchors only if  

 

you are not able to mount the bracket to a  

 wall 

stud.)

6.  

Drill the pilot holes right through this paper  

 template.
 

 

 

7.  

Carefully remove the template from the  

 wall.

8. 

Position the bracket over the pilot hole and  

 

secure in place using the supplied wood  

 screws.

9. 

If you mounting the bracket to the dry wall,  

 

insert the plastic wall anchors into the 1/8"  

 

pilot holes and drive the anchor into place  

 

using a Philips screwdriver until they are  

 

flush with the wall.

10.   Using the supplied #6 x1-3/4" screws,   
 

mount the bracket to the wall.  Be careful  

 

not to force the plastic anchors through the  

 

wall or over tighten the screws.

11. 

Attach the speaker wires to the speaker.

12.   Place the back of the speaker (with the  
 

other component of the bracket in place)  

 

and carefully slide the speaker down the  

 

wall until the brackets mate.

K-Series Manual.qrk

04/16/02     rev.2    pt/qrk

PN: 70002

16

K-SERIES SATELLITE SPEAKER