Phase Technology CI-6.0 IX QM Merkblatt

Install instructions for CI round flush mount models:

Universal flange & grille

assembly (CI-FGR QM)

(purchase separately)

Grille

Flange clamp (4x)
The CI-FGR QM will clamp 

material up to 1 

1

/

2

” thick.

Baffle clamp screw (4x)

Flange clamp 

screw (4x)

218-1240

When deciding upon a location, consider the following:

   • Make certain your speaker wires can be run to or are accessible from these 

       locations.

   • Make certain the wall or ceiling material is sturdy enough to support the 

       weight and vibration of the speakers.

   • It is recommended that our pre-construction rough-in brackets (part number

      RB-17*) be used whenever possible in new construction. A back box (part

      number BB-12) is also available.

   • Make certain the area behind the speaker is free of obstacles such as wall 

       studs, electrical wiring, pipes, etc.

   • Each speaker should be positioned properly, relative to the listening area 

       for good coverage.

   • Audio performance and room-to-room isolation will be improved if there is 

       some fiberglass insulation placed loosely behind the speaker.

*The RB-17 rough-in bracket is available for installations in new construction.

Thank you for purchasing Phase Technology Custom Installation 

speakers. Before installing, please read through this installation

manual thoroughly.

Speaker/baffle 

assembly 

Speaker 

installation tool