Phase Technology IW500i Benutzerhandbuch
Key Features
• BroadBeam® waveguide technology
delivers a consistent dispersion pattern up
to 10 kHz for maximum coverage area per
speaker (EASE™ documented).
• One 133 mm (5.25 in) polypropylene
woofer and one 25 mm (1 in) convex alu-
minum tweeter with FerroFluid cooling
mounted to an M5 Motorboard.
• 107 dB Max. SPL offers high output capa-
bilities and reduced amplification costs.
• Rapid installation blind-mount system for
quick and secure installation.
• Easy-access 6-position tap switch for 25,
70.7 & 100 Volt applications with voice coil/8
Ohm direct simplifies ordering & inventory
tracking.
• Included accessories: Mounting hardware,
Paint mask, Hole template.
• Optional accessory: pre-construction
bracket (AC-IW5-PCB).
• High-quality white paint finish. Custom
paint colors optional.
delivers a consistent dispersion pattern up
to 10 kHz for maximum coverage area per
speaker (EASE™ documented).
• One 133 mm (5.25 in) polypropylene
woofer and one 25 mm (1 in) convex alu-
minum tweeter with FerroFluid cooling
mounted to an M5 Motorboard.
• 107 dB Max. SPL offers high output capa-
bilities and reduced amplification costs.
• Rapid installation blind-mount system for
quick and secure installation.
• Easy-access 6-position tap switch for 25,
70.7 & 100 Volt applications with voice coil/8
Ohm direct simplifies ordering & inventory
tracking.
• Included accessories: Mounting hardware,
Paint mask, Hole template.
• Optional accessory: pre-construction
bracket (AC-IW5-PCB).
• High-quality white paint finish. Custom
paint colors optional.
Description
The IW500i is a 5.25” coax in-wall loud-
speaker that delivers effective low-end
response (55 Hz, -10 dB) and optimal off-
axis performance (up to 10 kHz, EASE™
documented). SoundTube’s proprietary
BroadBeam® waveguide tweeter system deliv-
ers consistent high-performance audio across
the operating bandwidth. The IW500i speaker
design incorporates a low-profile grille and
6-position tap switch with an 8 Ohm bypass.
Mounting hardware is included and features a
fast and secure optimally engineered constant-
tension mounting system. A pre-construction
bracket is offered as an optional accessory.
speaker that delivers effective low-end
response (55 Hz, -10 dB) and optimal off-
axis performance (up to 10 kHz, EASE™
documented). SoundTube’s proprietary
BroadBeam® waveguide tweeter system deliv-
ers consistent high-performance audio across
the operating bandwidth. The IW500i speaker
design incorporates a low-profile grille and
6-position tap switch with an 8 Ohm bypass.
Mounting hardware is included and features a
fast and secure optimally engineered constant-
tension mounting system. A pre-construction
bracket is offered as an optional accessory.
Applications
Designed for in-wall applications, the
IW500i is ideal for music and messaging in
boardroom, church, corporate A/V, retail,
hotel, hospital and education applications.
For additional bass response down to 41 Hz
(-10 dB), the CM1001d subwoofer may be
used.
IW500i is ideal for music and messaging in
boardroom, church, corporate A/V, retail,
hotel, hospital and education applications.
For additional bass response down to 41 Hz
(-10 dB), the CM1001d subwoofer may be
used.
Patented SoundTube
Technologies
SoundTube Entertainment and the MSE
Audio Group constantly develop new tech-
nologies which enhance audio product
performance. SoundTube Entertainment inno-
Audio Group constantly develop new tech-
nologies which enhance audio product
performance. SoundTube Entertainment inno-
© 2008 SoundTube Entertainment. All rights reserved. PN-TS-CMEZ REV 11.04.08
Specifications: IW500i
System Type
Impedance (nominal)
1
Sensitivity dB @ 2.83V/1M
Sensitivity dB @ 1W/1M
Sensitivity dB @ 1W/1M
2
Frequency Response (- 3 dB)
3
Frequency Response (-10 dB)
3
Max. Program Power
4
Max. Continuous Power RMS
5
Max. Power SPL @ 1 M
6
Coverage Angle (-6 dB @ 2 kHz)
Coverage Angle (-6 dB @ 10 kHz)
Coverage Angle (Avg. 2 - 10 kHz)
Directivity Factor (Q)
Directivity Index (DI) dB
Tap Selector
Transducer - Low Frequency Driver
Transducer -
Coverage Angle (-6 dB @ 10 kHz)
Coverage Angle (Avg. 2 - 10 kHz)
Directivity Factor (Q)
Directivity Index (DI) dB
Tap Selector
Transducer - Low Frequency Driver
Transducer -
High Frequency Driver
Low Frequency Voice Coil
Crossover Frequency
Network Type: Low Pass
Network Type: High Pass
Enclosure Material
Motor-board
Grille
Inputs
Colors
Height
Width
Depth
Weight
Shipping Weight
Included Accessories
Optional Accersories
Packaging
Regulatory - CE
Crossover Frequency
Network Type: Low Pass
Network Type: High Pass
Enclosure Material
Motor-board
Grille
Inputs
Colors
Height
Width
Depth
Weight
Shipping Weight
Included Accessories
Optional Accersories
Packaging
Regulatory - CE
70.7 V Output
100 V Output 25 V Output
33 w 103.0 dB
17 w 100.5 dB
17 w 100.5 dB
9 w 97.5 dB
6 w 96.0 dB
3 w 93.0 dB
5 w 95.0 dB
3 w 93.0 dB
1.3 w 89.0 dB
0.63 w 86.0 dB
0.63 w 86.0 dB
33 w 103.0 dB
17 w 100.5 dB
17 w 100.5 dB
9 w 97.5 dB
6 w 96.0 dB
5.25" Coax, in wall, sealed (33 Watt transformer for
25/70.7/100 Volt or 8 Ohm direct)
8 ohm
88.0 dB
88.0 dB
72 Hz - 22 kHz
55 Hz - 22 kHz
150 w
75 w
107.0 dB
80º horizontal / 120º vertical
120º horizontal / 120º vertical
115º horizontal / 115º vertical
25/70.7/100 Volt or 8 Ohm direct)
8 ohm
88.0 dB
88.0 dB
72 Hz - 22 kHz
55 Hz - 22 kHz
150 w
75 w
107.0 dB
80º horizontal / 120º vertical
120º horizontal / 120º vertical
115º horizontal / 115º vertical
4.2 (Averaged 100 HZ - 10 kHz) / 7.8 (2 kHz)
5.6 dB (Averaged 100 HZ - 10 kHz) / 8.9 dB (2 kHz)
6 Position rotary switch with 8 ohm direct
5.6 dB (Averaged 100 HZ - 10 kHz) / 8.9 dB (2 kHz)
6 Position rotary switch with 8 ohm direct
1 x 133 mm (5.25 in) Polypropylene cone, butyl rubber surround
25mm (1in) Convex aluminum tweeter with waveguide
25.4 mm / 1.00 in
3.0 kHz
3.0 kHz
12 dB per octave, 2nd order
12 dB per octave, 2nd order
12 dB per octave, 2nd order
Injection molded ABS, glass fiber reinforced
Cast aluminum
Powder coated steel
Spring terminal
White (only) Paintable
11.84 in / 300.7 mm
8.64 in / 219.5 mm
3.90 in / 99.1 mm
7.9 lb / 3.6 kg
10.0 lb / 4.5 kg
Paint mask, hole template
Preconstruction bracket (AC-IW5-PCB)
1 per box
Approved
Transformer Taps
Cast aluminum
Powder coated steel
Spring terminal
White (only) Paintable
11.84 in / 300.7 mm
8.64 in / 219.5 mm
3.90 in / 99.1 mm
7.9 lb / 3.6 kg
10.0 lb / 4.5 kg
Paint mask, hole template
Preconstruction bracket (AC-IW5-PCB)
1 per box
Approved
Transformer Taps
Impedance listed per IEC 60268-5 with
a minimum less than 80% the nominal
impedance
a minimum less than 80% the nominal
impedance
1w1m sensitivity determined using
nominal impedance
nominal impedance
Frequency response measured in half
or full space as dictated by speaker
mounting configuration
or full space as dictated by speaker
mounting configuration
Max program power is 3 dB above max
continuous power
continuous power
Continuous power rating, EIA-426-B test
Max output based on max continuous power
Max useable SPL based on testing
by NWAA Labs
Max output based on max continuous power
Max useable SPL based on testing
by NWAA Labs
1
2
3
4
5
6
7
IW500i
In-Wall Speaker
Technical Information for System Engineers