Insignia NS-0S312 Merkblatt

• Speakers 

(2)

•  Wall-mount brackets (2)
• Screws 

(4)

•  Knobs (4) (For wall mounting)

•  Quick Setup Guide

1  Connect the red speaker terminals to the red (+) amplifier terminals.
2  Connect the black speaker terminals to the black (-) amplifier terminals.
See the documentation that came with your amplifier or home theater system 
for more information on connecting the cables.

Note: For best performance, speaker wires must be connected correctly. All two-conductor wire 
is marked in some way to help with this. One side will be marked with a colored stripe, raised 
rib, or different-color conductor. Use the marked side for the “red” connections. We recommend 
using 18-gauge or heavier speaker wire.

Quick Setup Guide  

I

  

NS-OS312

Before using your new product, please read 

these instructions to prevent any damage.

NOTE: If you are installing your speakers outdoors, select locations 
facing your listening area that are protected from rain and snow, and 
are out of direct sunlight.

1 Screw the wall-mount brackets onto the wall where 

you want to mount the speakers. If the location is 
backed by wooden wall studs, you can use the wood 
screws provided. If the location is backed by only dry 
wall, concrete, or other wall types, use wall anchors 
(not included).

2 Slide a speaker into each mounting bracket.
3 Line up the screw holes (one on top, one on bottom), 

then screw a knob into each hole to secure the 
speaker to the bracket. You can loosen the knobs to 
adjust the direction the speakers are pointing.

Amplifier/home 
theater system

Note: Make sure to 

connect the + terminal on 

the speaker to the 

+ terminal on the amplifier 
and connect the - terminal 

on the speaker to the 

- terminal on the 

amplifier.

NS-OS312_14-1140_QSG_V2_EN.ai   1   10/7/2014   3:06:33 PM

NS-OS312_14-1140_QSG_V2_EN.ai   1   10/7/2014   3:06:33 PM