JVC UX-M6VUB Benutzerhandbuch
English
– 17 –
Playing Back Tapes
• Use only type I normal tapes.
The use of tapes longer than 120 minutes is not
recommended, since characteristic deterioration may
occur and these tapes easily jam in the pinchrollers and
the capstans.
recommended, since characteristic deterioration may
occur and these tapes easily jam in the pinchrollers and
the capstans.
Loading a Tape
1 Press
0 EJECT to open the
tape deck door.
2 Insert a recorded tape with the open side
down and close the tape deck door.
Tape Playback
1 Press TAPE/REV.MODE.
The unit automaticaly turns on.
2 Press
8/2 or 3/8 to select
the playback direction.
Playback starts.
“PLAY” appears on the display and
the playback direction indicator
moves to show the tape direction.
“PLAY” appears on the display and
the playback direction indicator
moves to show the tape direction.
3 To stop playback, press
7.
To interrupt playback
Press the last selected
8/2 or 3/8.
“PAUSE” appears on the display.
• If you press the button opposite to the last selected
direction, playback starts in the reverse direction.
To resume playback, press
8/2 or 3/8 again.
Auto Reverse
Press TAPE/REV.MODE repeatedly
to select the desired playback mode.
to select the desired playback mode.
:
playback on one side of the tape only.
: both sides are played once.
: both sides are played repeatedly up to 10 times unless
you press
7.
Rewind/Fast Forward
1 Press
4 or ¢ to rewind or
fast forward the tape.
“TAPE” appears and the playback
direction indicator blinks on the display.
direction indicator blinks on the display.
2 Press
7 to stop rewinding or fast
forwarding.
• The tape stops automatically at the end of the rewinding or
fast forwarding.
EJECT
TAPE
REV. MODE
DIRECTION
PLAY/PAUSE
STOP/CLEAR
DIRECTION
PLAY/PAUSE
SEARCH/TUNING
STOP/CLEAR
TAPE
REV. MODE