JVC EX-A3 Benutzerhandbuch

 

• Each time you press [LINE], the display 

changes in the display window as follows.
- “LINE1” for selecting the device connected 

to the [LINE1 IN] terminal

- “LINE2” for selecting the device connected 

to the [LINE 2 IN] terminals

- “LINE3 DIGITAL” for selecting the digital 

audio device connected to the [LINE 3 
DIGITAL IN] terminal

• Refer to page 16. 

NOTE
• Refer also to the operation manual for the con-

nected device.

• An audio signal from a device connected to the 

[LINE1 IN] terminal is not output via the [LINE1 
OUT] terminal.

• An audio signal from a device connected to the 

[LINE 2 IN] terminals is not output via the [LINE 
2 OUT] terminals.

• An audio signal from a device connected to the 

[LINE 3 DIGITAL IN] terminal is not output via 
the [LINE 3 DIGITAL OUT] terminal.

• When no device is connected to the [LINE 3 

DIGITAL IN] terminal or the power of the con-
nected device is off, after “LINE 3 DIGITAL” is 
selected, the display changes to “LINE 3 
UNLOCK”. 

You can select the gain of the signal from the 
[LINE1 IN] terminal. Use the initial settings for nor-
mal operation. If the sound is too small or too loud, 
change the settings. 

• Each time you press [INPUT LEVEL], the 

display changes as follows. 

“INPUT LEVEL1” : the initial setting

“INPUT LEVEL2” 

“INPUT LEVEL3”

• The signal gain decreases in the order of 

“INPUT LEVEL1”, “INPUT LEVEL2” and 
“INPUT LEVEL3”. 

EX-A3[J_C].book  Page 45  Wednesday, December 27, 2006  3:53 PM