Sanyo DC-MX30 Benutzerhandbuch

 

13

z 

Treat the disc carefully. Handle the disc only by its edge. Never allow your fingers to contact 

with the shiny, unprinted side of the disc. 

z 

Do not attach adhesive tape, stickers etc., to the disc label. 

z 

Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents or adhesive 

cleaners to clean the disc. If necessary, use a CD cleaning kit. 

z 

If a disc skips or gets stuck on a section of the disc, it is probably dirty or damaged 

(scratched). 

z 

When cleaning the disc, wipe in straight lines from the center of the disc to the edge of the 

disc. Never wipe in circular motions. 

z 

To remove a disc from its storage case, press down on the center of the case and lift the disc 

out, holding it carefully by the edges. 

z 

Fingerprints and dust should be carefully wiped off the disc’s recorded surface with a soft 

cloth. Unlike conventional records, compact discs have no groove to collect dust and 

microscopic debris, so gently wiping with a piece of soft cloth should remove most particle. 

 

Cleaning the tape heads 

When dust or reddish-brown oxide has accumulated on the tape deck heads, pinch roller and 

capstan. Failure to clean these parts can result in inferior quality of sound, distortion of recorded 

sound, deterioration of high frequency sound reproduction and inconsistent tape speed. 

To ensure playback and recording with good quality sound, use a cleaning tape (available from your 

local audio dealer) to clean the head block of the deck after about every 10 hours of use. 

1. 

Open the cassette compartment lid by pressing 

 STOP/EJECT button. 

2. 

Moisten a cotton bud with isopropyl alcohol or special head cleaning fluid. Gently rub the face 

of PLAY and RECORD head and erase head. Also clean the capstan and pinch roller.