Panasonic SC-HT65 Benutzerhandbuch

Seite von 24
22
RQTV0225
Specifications (DIN 45 500)
g
 AMPLIFIER SECTION
RMS output power of each channel driven
10 % total harmonic distortion
1 kHz front CH 
125 W per channel (3 Ω)
1 kHz surround CH 
125 W per channel (3 Ω)
1 kHz center CH 
250 W per channel (6 Ω)
100 Hz subwoofer CH 
250 W per channel (6 Ω)
Total RMS output power 
1000 W
Rated minimum sine wave RMS power output
1% total harmonic distortion (Dolby Digital mode)
1kHz front CH 
75 W per channel (3 Ω)
1kHz surround CH 
75 W per channel (3 Ω)
1kHz center CH 
150 W per channel (6 Ω
)
100 Hz subwoofer CH 
150 W per channel (6 Ω)
Total RMS output power 
600 W
Total harmonic distortion
Half power at 1 kHz (Front CH) 
0.5 % (3 Ω)
Input sensitivity
DVD-P, TV, BD/DVR 
450 mV, IHF'66
S/N at rated power (3 Ω)
DVD-P, TV, BD/DVR 
80 dB (85 dB, IHF'66)
Input impedance
DVD-P, TV, BD/DVR 
47 kΩ
Tone controls
BASS 
50 Hz, +6 to -6 dB
TREBLE 
20 kHz, +6 to -6 dB
g
 FM TUNER SECTION
Frequency range 
87.50 MHz to 108.00 MHz
Sensitivity
S/N 30 dB 
1.9 µV/75 Ω
S/N 26 dB 
1.8 µV/75 Ω
S/N 20 dB 
1.6 µV/75 Ω
IHF usable sensitivity 
(IHF '58) 2.2 µV/75 Ω
IHF 46 dB stereo quieting sensitivity 
22 µV/75 Ω
Total harmonic distortion
MONO 
0.2%
STEREO 
0.3%
S/N
MONO 
60 dB (71 dB, IHF)
STEREO 
58 dB (65 dB, IHF)
Frequency response 
20 Hz to 15 kHz, +1 dB, -2 dB
Image rejection at 98 MHz 
40 dB
IF rejection at 98 MHz 
70 dB
Stereo separation (1 kHz) 
40 dB
Antenna terminal 
75 Ω (unbalanced)
g
 AM TUNER SECTION
Frequency range 
522 kHz to 1611 kHz (9 kHz steps) 
 
530 kHz to 1620 kHz (10 kHz steps)
Sensitivity 
500 µV/m
Selectivity (at 999 kHz) 
30 dB
g
 SPEAKER SECTION
Front speaker (SB-HF550)
Type 
1 Way, 1 Speaker
Speaker unit
Full range 
6.5 cm cone type
Input power (IEC) 
125 W (Max/3 Ω)
Output sound pressure level 
80 dB/W (1.0 m)
Frequency range 
76 Hz to 25 kHz (-16 dB)
 
89 Hz to 22 kHz (-10 dB)
Dimensions (W x H x D) 
 252 mm x 1123 mm x 235 mm 
Mass 
3.7 k
g
Surround speaker (SB-HS550)
Type 
1 Way, 1 Speaker
Speaker unit
Full range 
6.5 cm cone type
Input power (IEC) 
125 W (Max/3 Ω)
Output sound pressure level 
80 dB/W (1.0 m)
Frequency range 
95 Hz to 25 kHz (-16 dB)
 
120 Hz to 22 kHz (-10 dB)
Dimensions (W x H x D) 
 92 mm x 142 mm x 95 mm 
Mass 
0.6 k
g
Center speaker (SB-HC550)
Type 
2 Way, 2 Speakers
Speaker unit
Full range 
6.5 cm cone type x 2
Input power (IEC) 
250 W (Max/6 Ω)
Output sound pressure level 
82 dB/W (1.0 m)
Crossover frequency 
5 kHz
Frequency range 
80 Hz to 25 kHz (-16 dB)
 
96 Hz to 22 kHz (-10 dB)
Dimensions (W x H x D) 
270 mm x 94 mm x 95 mm 
Mass 
1.3 k
g
Subwoofer (SB-HW550)
Type 
1 Way, 1 Speaker
Speaker unit (Woofer) 
16 cm cone type
Output sound pressure level 
81 dB/W (1.0 m)
Frequency range 
31 Hz to 220 Hz (-16 dB)
 
37 Hz to 180 Hz (-10 dB)
Dimensions (W x H x D) 
153 mm x 415 mm x 257 mm
Mass 
3.6 k
g
g
 GENERAL
Power supply 
AC 230 V to 240 V, 50 Hz
Power consumption 
135 W
Dimensions (W x H x D)  
430 mm x 105 mm x 388 mm
Mass  
4.1 k
g
Power consumption in standby mode:  
1 W
Notes:
1.  Specifications are subject to change without notice.
2.  Total harmonic distortion is measured by the digital spectrum 
analyzer.
Digital input  OPTICAL 
2
 
COAXIAL 
1
 
HDMI Input 
2
 
HDMI Output 
1
Wireless Ready 
SH-FX65GN-K
Changing the remote control code
Change the code if you find the 
remote control unintentionally also 
controls other Panasonic equipment.
Do the following to set the remote 
control code and this unit’s remote 
control mode to the same one.
Change the main unit’s mode
Change the remote control’s code
To restore the code to “1”
On the main unit: In step 3, select 
“1”.
On  the  remote  control:  In  step  6,  while 
pressing [OK], press and hold [1] for about 
2 seconds.
INPUT SELECTOR
TUNE
MENU
RETURN
SETUP
SETUP MIC
VOLUME
ENTER
AUTO
SPEAKER SETUP
TUNE
MENU
RETURN
SETUP
ENTER
1.  Enter the SETUP menu.
 
 
Press and hold 
 .
2.  Select and press [ENTER].
3.  Select and press [ENTER].
4.  Press  [-MENU,  –SETUP,  RETURN] 
repeatedly  to  select “EXIT”  and 
press [ENTER].
MENU
RETURN
SETUP
5.  Press 
.
6.  While  pressing 
,  press  and  
 
hold 
 for about 2 seconds.
 TUNER
BAND
OK
2
Remote control operation guide/Specifications
Remote control operation guide
SC-HT65 GN-En.indb   22
8/17/2007   4:20:35 PM