Panasonic SC-AK960 Benutzerhandbuch
12
RQT8043
RQTX0169
L
A
N
G
-
5
LANG - 5
L
A
N
G
-
4
LANG - 4
F
R
A
N
Ç
A
IS
FRANÇAIS
D
A
N
S
K
DA
N
S
K
E
N
G
L
IS
H
ENGLISH
FM/AM radio
Manual tuning
Manual tuning
1
Press [TUNER / BAND] to select “FM” or “AM”.
2
Press [PLAY MODE] to select “MANUAL”.
3
Press [
4, / REW] or [¢, / FF ] to select the frequency
of the required station.
“ ST ” is displayed when a stereo FM broadcast is being received.
“ ST ” is displayed when a stereo FM broadcast is being received.
To tune automatically
Press and hold [
Press and hold [
4, / REW ] or [¢, / FF ] until the frequency
starts changing rapidly. The unit begins auto tuning, stopping when it
fi nds a station.
• Auto tuning may be interrupted when there is excessive interfer-
fi nds a station.
• Auto tuning may be interrupted when there is excessive interfer-
ence.
• To cancel auto tuning, press [
4, / REW ] or
[
¢, / FF ] once again.
To improve the sound quality
Press and hold [PLAY MODE] to display “MONO”.
To cancel
Press and hold [PLAY MODE] again until “MONO” disappears.
• MONO is also canceled if the frequency is changed.
• Turn off “MONO” for normal listening.
Press and hold [PLAY MODE] again until “MONO” disappears.
• MONO is also canceled if the frequency is changed.
• Turn off “MONO” for normal listening.
FM allocation setting
By main unit only
This system can also receive FM broadcasts allocated in 0.1 MHz
steps.
This system can also receive FM broadcasts allocated in 0.1 MHz
steps.
To change the step to 0.1 MHz
1
Press and hold [TUNER/BAND].
After a few seconds the display changes to a fl ashing display of
the current minimum frequency.
the current minimum frequency.
2
Continue to hold down [TUNER/BAND].
• When the minimum frequency changes, release the button. To
return to the original step, repeat the above steps.
• After changing the setting, previously preset frequency will be
cleared.
Memory preset
Memory preset
20 FM and 15 AM stations can be preset.
Preparation
Press [TUNER / BAND] to select “FM” or “AM”.
Press [TUNER / BAND] to select “FM” or “AM”.
Automatic presetting
1
Tune to the frequency where presetting is to begin.
2
Press and hold [PROGRAM] to start presetting.
The tuner presets all the stations it can receive into the channels in
ascending order. When fi nished, the last station memorized is tuned
in.
ascending order. When fi nished, the last station memorized is tuned
in.
Manual presetting
1
Press [PLAY MODE] to select “MANUAL”.
2
Press [
4, / REW] or [¢, / FF] to tune to the required
station.
3
Press [PROGRAM].
4
Press the numeric buttons to select a channel.
For channels 10 to 20 press [
h10], then the two digits.
The station occupying a channel is erased if another station is
preset to that channel.
preset to that channel.
Selecting a preset station
Press the numeric buttons to select the channel.
OR
1
Press [PLAY MODE] to select “PRESET”.
2
Press [
4, / REW] or [¢, / FF] to select the channel.
RQTX0169-P.indd 12
RQTX0169-P.indd 12
7/18/08 9:24:59 AM
7/18/08 9:24:59 AM