Panasonic SC-HC38DB Benutzerhandbuch
11
RQT9743
Preparation
≥ Turn the unit on.
≥ A station previously stored is overwritten when another
station is stored in the same channel preset.
1
Press [PLAY MENU] to select “A.PRESET”.
2
Press [3, 4] to select “LOWEST” or “CURRENT”
and then press [OK].
LOWEST:
and then press [OK].
LOWEST:
CURRENT:
To begin auto preset with the current frequency.*
To begin auto preset with the current frequency.*
* To change the frequency, refer to “Manual tuning and
presetting”.
The tuner starts to preset all the stations it can
receive into the channels in ascending order.
receive into the channels in ascending order.
Preparation
1 Press [PLAY MENU] repeatedly to select
1 Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
2 Press [
3, 4] to select “PRESET” and then press
[OK].
Press [:/6] or [5/9] to select the channel.
∫ Manual tuning and presetting
Select a radio broadcast.
1
Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
“TUNEMODE”.
2
Press [3, 4] to select “MANUAL” and then press
[OK].
[OK].
3
Press [:/6] or [5/9] to tune to the
required station.
required station.
≥ To start automatic tuning, press and hold [:/6],
[5/9] until the frequency starts scrolling. Tuning
stops when a station is found.
To preset the channel
4
While listening to the radio broadcast
Press [OK].
Press [OK].
5
Press [3, 4] to select the channel and then press
[OK].
[OK].
∫ To improve FM sound quality
1
While receiving FM broadcasts, press
[PLAY MENU] repeatedly to select “FM MODE”.
[PLAY MENU] repeatedly to select “FM MODE”.
2
Press [3, 4] to select “MONO” and then press
[OK].
[OK].
≥ This setting can be preset and memorised. To do so,
continue to step 4 of “Manual tuning and presetting”.
≥ Select “STEREO” in step 2 to return to stereo broadcasts.
≥ “MONO” is cancelled if the frequency is changed.
≥ “MONO” is cancelled if the frequency is changed.
≥ “STEREO” is displayed when this unit tunes to a stereo
broadcast.
Listening to FM/AM radio
AM radio is only available for [SC-HC38]
([Australia[and[New[Zealand[ only).
([Australia[and[New[Zealand[ only).
You can preset up to 30 FM channels / 15 AM
channels.
channels.
≥ Make sure that the antenna(s) are connected. (
l 5)
≥ Press [RADIO] to select “FM” or “AM”.
Presetting stations automatically
To begin auto preset with the lowest frequency
(FM 87.50, AM 520 or AM 522).
(FM 87.50, AM 520 or AM 522).
Listening to a preset channel
≥ If “MONO” is selected, regardless of the type of signal this
unit is receiving, “FM MONO” is displayed. (l below)
∫ To display the current FM signal status
While receiving FM broadcast, press [DISPLAY].
“FM ST”:
The FM signal is in stereo.
“FM”:
The FM signal is in monaural.
≥ “FM” is also displayed even if this unit is not tuned to a
station.
SC-HC38_DBEB_DBGN_GS~RQT9743-B.book 11 ページ ２０１３年１月２１日 月曜日 午後１時６分