Panasonic SC-PMX100/SC-PMX100B Benutzerhandbuch

RQ

T999

5

• When the connection is established, “

” is indicated 

on the main unit’s display.

• Use category 5 or above straight LAN cables (STP) when 

connecting to peripheral devices.

• The LAN cable must be connected or disconnected while 

the AC mains lead is disconnected. 

• Inserting any cable other than a LAN cable in the LAN port 

can damage the system.

• If the LAN cable is disconnected, the network-related 

settings (> right) will be initialized. In that case, make the 

settings again.

• When a LAN cable is connected, the Wi-Fi function will be 

disabled.

You can change this system's name on the network, 

change the security options for this system, and use 

specific IP address, subnet mask, default gateway, 

primary DNS, etc.

• Complete the network settings. (> 6)

• Connect your device to the same network as this 

system.

• Check this system’s IP address (> 18), and note it 

down.

• It may take a few minutes until the settings page is 

displayed depending on the environment. In that case, 

reload the browser.

• If the unit is connected with Wi-Fi, only the device 

name and the security options for this system can be 

changed. Close the settings page after making the 

changes.

– To change the device name, select “Change”, and 

type a new device name, and then select “Apply”.

– To change the security options for this system, select 

“Change” for the AirPlay password setting. 

If you have set an AirPlay password previously, you 

will need your old password before making changes. 

Make the changes and then select “Apply”.

• Refer to the step 7 of “Using an Internet browser” (> 6) 

for details on a device name.

• Refer to the step 8 of “Using an Internet browser” (> 7) 

for details on security options for this system.

• If your network requires specific settings, deselect 

“DHCP” to disable DHCP. 

– You can use specific IP address, subnet mask, 

default gateway, primary DNS, etc.

• When the connection is established, “Success” 

appears on the main unit’s display. 

You can stream music from your devices or online music 

services to this system’s speakers and other AllPlay 

speakers.

You can also stream music source of this system to other 

AllPlay speakers.

You can use the AllPlay or the DLNA function to stream 

music from the device on the network to this system’s 

speakers by using the app “Panasonic Music Streaming” 

(free of charge), etc.
• [iOS] : App Store

• [Android] : Google Play™
Preparation

• Complete the network settings. 

(> 6)

• Connect the following devices to the same network as 

this system.

– Device with “Panasonic Music Streaming”, etc. 

installed

– Device containing music

The following steps are based on “Panasonic Music 

Streaming”.

• Check that “

” is indicated on the display.

• If it is not indicated, check the network settings. (> 6)

• Always use the latest version of the app.

• To add music source, select “+ My Music Network” and 

then select the device containing music.

– The added music source is numbered in order from 1.

• If you have multiple AllPlay speakers, you can enjoy 

synchronized sound from them. Select “

” and 

then select the speakers to group.

LAN cable

(not supplied)

Broadband router, etc.

e.g.,

You can also change the name of this system by 

changing a setting in the app “Panasonic Music 

Streaming” (version 2.0.8 or later) (> right). For 

details on the app, refer to the site below.

(This site is in English only.)

My room 

e.g.,

SC-PMX100-100B_EGEBGN-RQT9995-B.book  8 ページ  ２０１５年４月２０日　月曜日　午後３時４５分