Panasonic SCPM19 Benutzerhandbuch
Listening operations
15
RQT7369
5
4
7
1
3
2
2
DEL
4
/REW/
4
,
3
/FF/
¢
1
CD
6
➞
CLEAR
2
PROGRAM
3
DISC
4
1
2
3
4
5
ABC
DEF
GHI
JKL
5
6
Repeat steps 3, 4, 5.
7
CD
6
CDs
Program play
This function allows you to program up to 24 tracks.
1
Press [CD
3/8] and then [7 CLEAR].
2
Press [PROGRAM].
3
Press [DISC].
4
(within 10 seconds or so)
Press [1] – [5] to select the disc you want.
Press [1] – [5] to select the disc you want.
5
Press the numeric button(s) to select the
desired track.
desired track.
6
Repeat steps 3 through 5 to program other tracks.
7
Press [CD
3/8] to start play.
When “CD FULL” appears
The number of programmed tracks is limited to 24 only.
The number of programmed tracks is limited to 24 only.
You can do the following during program mode:
“PGM” appears on the display when play is stopped. Press [4
“PGM” appears on the display when play is stopped. Press [4
4
4
4
4/
REW/
4] or [3
3
3
3
3/FF/¢] when “PGM” is displayed.
To check while programming, press [PROGRAM] twice after
“PGM” appears, then press [4
“PGM” appears, then press [4
4
4
4
4/REW/4] or [3
3
3
3
3/FF/¢].
Add to the program.
Repeat steps 3 through 5 in the stop mode.
Repeat steps 3 through 5 in the stop mode.
Memory retention
Your program is retained in memory for about 1 week while the
system is unplugged.
Your program is retained in memory for about 1 week while the
system is unplugged.
To replay your program
If you turned OFF your program with [PROGRAM], you can
play it again as explained below.
If you turned OFF your program with [PROGRAM], you can
play it again as explained below.
1.Press [PROGRAM].
2.Press [CD
3/8].
Notes
• During program play, you can search forward or backward
only within the current track.
• During program play, skipping is always in the programmed
order, whether forward or backward.
• You can use repeat mode with program play.
• You cannot program CD-DA together with MP3 tracks.
• You cannot program CD-DA together with MP3 tracks.
To
cancel program
play mode
play mode
clear the last track
clear all
programmed tracks
programmed tracks
select a two-digit
track
track
Action
Press [PROGRAM] in the stop mode.
Programmed contents will be saved in
memory.
Programmed contents will be saved in
memory.
Press [DEL] in the stop mode.
Press [
7 CLEAR]. Within 5 seconds,
press the button again to clear all
tracks. “CLEAR ALL” is displayed.
tracks. “CLEAR ALL” is displayed.
Press [
h10] and then the two numbers
you want.
RQT7369-1B_09-15_EN
17/2/04, 4:54 pm
15