Antex electronic SX-33 Benutzerhandbuch
36
3. Microphone Header - J5
J5 is a 2-pin, 0.100" spaced header that provides a micro-
phone input connection. This is the same connection provided
by the MIC jack on the bracket. A signal present at J5 is
switched in only when there is no plug in the MIC jack.
phone input connection. This is the same connection provided
by the MIC jack on the bracket. A signal present at J5 is
switched in only when there is no plug in the MIC jack.
1
Ground
MIC Input
MIC Input
2
4. Z.WAV Sound Module MPU-401 Header - J11
J11 is a 26-pin, dual-row, 0.100" spaced header the provides
connections for an Antex Z.WAV Sound Module. The interface
to the Z.WAV via this connector is Roland MPU-401 compati-
ble.
connections for an Antex Z.WAV Sound Module. The interface
to the Z.WAV via this connector is Roland MPU-401 compati-
ble.
5. Z.WAV Sound Module DSP Header - J12
J12 is a 6-pin, dual-row, 0.100" spaced header that provides a
connection for digital audio data from an Antex Z.WAV Sound
Module to the SX-3/SX-33/SX-33e DSP.
connection for digital audio data from an Antex Z.WAV Sound
Module to the SX-3/SX-33/SX-33e DSP.
6. C52 DSP Emulation Header - J13
J13 is a 14-pin, dual-row, 0.100" spaced header provided for
connecting a T.I. XDS510 emulator used for debugging DSP
software.
connecting a T.I. XDS510 emulator used for debugging DSP
software.
7.
C31 DSP Emulation Header - J14
J14 is a 12-pin, dual-row, 0.100" spaced header provided for
connecting a T.I. XDS500 or XDS1000 emulators used for de-
bugging DSP software.
connecting a T.I. XDS500 or XDS1000 emulators used for de-
bugging DSP software.
SETTING JUMPERS ON EARLY MODEL Z1/SX-3