Phase Technology XT800 Benutzerhandbuch
environment for sound reproduction. The
result is accurate sound and tight bass in an
indestructible enclosure.
result is accurate sound and tight bass in an
indestructible enclosure.
Technical Data
SoundTube Entertainment strives to pro-
vide complete and effective technical infor-
mation and data to dealers, engineers and
designers. All data are available from
SoundTube Entertainment or at
www.soundtube.com.
vide complete and effective technical infor-
mation and data to dealers, engineers and
designers. All data are available from
SoundTube Entertainment or at
www.soundtube.com.
Technical data and downloads include:
Tech Sheets – Technical information and
architectural specs for system engineers.
architectural specs for system engineers.
Da
Data Acquisition
All performance data acquired at
SoundTube’s Technical Measurement Center
(TMC) are analyzed using standardized mea-
surement techniques, including Measured
Length Sequence (MLS) and Time Delay
Spectrometry (TDS). Performance, develop-
ment, and data acquisition tools include:
Gold Line TEF 20 Suite, CLIO, LMS, LEAP,
and proprietary modeling software.
SoundTube’s Technical Measurement Center
(TMC) are analyzed using standardized mea-
surement techniques, including Measured
Length Sequence (MLS) and Time Delay
Spectrometry (TDS). Performance, develop-
ment, and data acquisition tools include:
Gold Line TEF 20 Suite, CLIO, LMS, LEAP,
and proprietary modeling software.
Data for Other SoundTube
Products
Products
Also available: Sales & installation infor-
mation for all SoundTube speaker systems
including open-ceiling, in-ceiling, surface-
mount, in-ground and sound-focusing
speakers.
mation for all SoundTube speaker systems
including open-ceiling, in-ceiling, surface-
mount, in-ground and sound-focusing
speakers.
Architectural Specifications
The loudspeaker shall be of in-ground
design consisting of one 203 mm (8.0 in)
low-frequency transducer and one 25 mm
(1.0 in) high-frequency transducer with a
frequency-dividing network installed in a
vented enclosure. The low-frequency voice
coil diameter shall be 40 mm (1.6 in).
design consisting of one 203 mm (8.0 in)
low-frequency transducer and one 25 mm
(1.0 in) high-frequency transducer with a
frequency-dividing network installed in a
vented enclosure. The low-frequency voice
coil diameter shall be 40 mm (1.6 in).
Performance specifications of a typical pro-
duction unit shall be as follows: Usable
frequency response shall extend from
40 Hz – 20 kHz. The loudspeaker shall be
available in 64 W transformer and 8 Ohm
models. Taps shall be nominally 4 W @ 70.7
V (8 W @ 100 V), 8 W @ 70.7 V (16W @
100 V), 16 W @ 70.7 V, 64 W @ 100 V and
64 W @ 70.7 V (not used in 100
duction unit shall be as follows: Usable
frequency response shall extend from
40 Hz – 20 kHz. The loudspeaker shall be
available in 64 W transformer and 8 Ohm
models. Taps shall be nominally 4 W @ 70.7
V (8 W @ 100 V), 8 W @ 70.7 V (16W @
100 V), 16 W @ 70.7 V, 64 W @ 100 V and
64 W @ 70.7 V (not used in 100
V systems).
The frequency-dividing network shall have a
crossover frequency of 2.4 kHz. Rated power
capacity of the components and network shall
be at least 100 Watts continuous RMS power.
crossover frequency of 2.4 kHz. Rated power
capacity of the components and network shall
be at least 100 Watts continuous RMS power.
Technical data, EASE
™
plots, SoundTubeSPEC
™
software & product downloads available at www.soundtube.com
XT800
XT800
Outdoor/In-Ground Speaker
Technical Information for System Engineers
100.0
90.0
dBSPL
80.0
70.0
60.0
50.0
30
100
1K
10K Hz
20K
-180.0
-108.0
-36.0
36.0
108.0
Deg
180.0
Half space (2
p)
2
p simulates mounted or in-ground applications.
100.0
80.0
Ohm
60.0
40.0
20.0
0.0
20
100
1K
10K Hz
20K
-180.0
-108.0
-36.0
36.0
108.0
Deg
180.0
Impedance
Phase
Phase
Phase/Impedance Reponse
Frequency Response