Sony HDW-M2000P Benutzerhandbuch
Chapter 5
Editing
Chapter 5
Editing
5-15
Notes
• In preread editing, if an input video signal is used as
the reference signal for the output video signal, this
forms a feedback loop. To prevent the occurrence of
feedback, set the F2 (OUTREF)(see page 9-7) in
function menu page 4 to REF, and set item 309 in the
extended setup menu to AUTO1 (see page 10-15) so
as to use an external reference signal.
forms a feedback loop. To prevent the occurrence of
feedback, set the F2 (OUTREF)(see page 9-7) in
function menu page 4 to REF, and set item 309 in the
extended setup menu to AUTO1 (see page 10-15) so
as to use an external reference signal.
• When the preread mode is selected, to prevent
feedback due to the loop connection, whatever the
editing mode of this unit, no E-E video output is
available.
When the PREREAD is set to OFF after preread
editing, however, if the loop connection remains and
an E-E signal is output, feedback will occur.
To prevent this, select PB mode for the video and
digital audio channels in all the modes before the
preread editing, as follows.
editing mode of this unit, no E-E video output is
available.
When the PREREAD is set to OFF after preread
editing, however, if the loop connection remains and
an E-E signal is output, feedback will occur.
To prevent this, select PB mode for the video and
digital audio channels in all the modes before the
preread editing, as follows.
1
Set F2 (PB/EE) in function menu HOME page to
PB.
PB.
2
Set the F6 (PREREAD)(see page 9-7) in function
menu page 4 to ON.
menu page 4 to ON.
3
Make the necessary connections for the preread
editing.
editing.
4
After selecting the desired insert editing mode,
carry out the preread editing.
carry out the preread editing.
5
When the preread editing is completed, remove the
connections.
connections.
6
Set the PREREAD to OFF.
7
Check that no loop connection remains.