Atlantic Technology WA-50 Merkblatt

CAUTION: To reduce the risk of electric shock, do not remove the cover (or back). No 
user serviceable parts inside. Refer to qualified personnel.
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to 
rain or moisture. This device generates a fair amount of heat. Make sure nothing blocks 
the ventilation to the rear panel of the unit.

The lightning flash with arrowhead, with in an equilateral triangle, is intended 
to alert the user to the presence of uninsu lated “dangerous voltage” within the 
product’s enclosure that may be of sufficient magnitude to constitute a risk of 
electrical shock to persons.

The exclamation point within an equilateral triangle is intended to alert 
the user to the presence of important operating maintenance (servicing) 
instructions in the literature accompanying the appliance.

The contents of this manual are Copyright © 2010 by Atlantic Technology 
International, Corp., and may not be duplicated or reproduced by any means, 

whether physical, electronic or otherwise without prior written consent from Atlantic Tech-
nology International, Corp.

Atlantic Technology and the Atlantic Technology logo are registered trademarks of Atlantic 
Technology International, Corp.

Specifications are those in effect at the time of printing. Atlantic Technology International, 
Corp. reserves the right to change specifications or designs at any time without notice 
without obligation to modify existing units.

Wireless  Audio System

Wireless Transmitter

Wireless Receiver

Wireless Transmitter

Wireless Receiver

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions: (1) this device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may cause undesired 
operation

Changes or modifications not expressly approved by the party responsible for compli-
ance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment 
generates and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. 
If this equipment does cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures:



  Increase the separation between the equipment and receiver.



  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should 
be maintained between this device and persons during device operation.

To ensure compliance, operations at closer than this distance is not recommended. The 
antenna used for this transmitter must not be co-located in conjunction with any other 
antenna or transmitter.

Congratulations on the purchase of an Atlantic Technology WA-50 
Wireless Audio System. Never before has it been so easy to distribute 
audio from one location in your home or business to another than it 
is right now.

In this document, we will walk you through the installation of the 
WA-50 system in just a few of the configurations that are possible with 
this high performance wireless audio distribution system.



  Wireless full CD quality sound



  Robust and dedicated network for your audio



  Easy setup, get wireless music in seconds



  Wireless range up to 50 m.; 100 m in line of sight



  No interference or delays



  Time delay max 10ms



  Works with both Mac & PC



  Plug'n play - No software needed



  Flexible multi-zone functionality



  RF band: 2.4GHz



  Dedicated proprietary protocol



  USB 2.0 interface



  SNR: 93dB

If your product needs service, please call Atlantic Technology 
at 781-762-6300.
You will need to present the original bill of sale to establish 
the date of purchase. In the event that the proof of purchase 
cannot be established with the original receipt, the warranty 
period shall be determined by the earliest date of manufac-
ture shown on the unit.
In the event that you wish to return your Atlantic Technology 
Product back to us, for any reason, please call to arrange for 
a Return Authorization Number. This will ensure that your 
problem is discussed with a service technician who will deter-
mine if there is a quick solution to your problem.
Atlantic Technology shall not be liable for, in any way respon-
sible for, any incidental or consequential damages of any kind. 
Some states do not allow limitations on how long an implied 
warranty lasts and/or do not allow the exclusion of inciden-
tal or consequential damages; therefore, the limitations and 
exclusions stated herein may not apply to you. This warranty 
gives you specific legal rights; and you may also have other 
rights that vary from state to state.
THERE ARE NO WARRANTIES GIVEN BY ATLANTIC 
TECHNOLOGY THAT EXTEND BEYOND THE DESCRIP-
TION GIVEN HEREIN. ANY IMPLIED WARRANTIES OF 
FITNESS FOR PURPOSE SOLD, MERCHANTABILITY, 
DESCRIPTION, QUALITY OR ANY OTHER MATTERS ARE 
LIMITED TO THE TERMS OF THE EXPRESSED LIMITED 
WARRANTY STATED HEREIN.
Products are sold on the basis of specifications applicable at 
the time of sales. Atlantic Technology shall have no obligation 
to modify products once they have been sold. This warranty is 
applicable only in the United States. For applicability in other 
countries, please call Atlantic Technology.

343 Vanderbilt Avenue, Norwood, MA 02062    

(781) 762-6300   www.atlantictechnology.com

This warranty protects the owner of the Atlantic Technology 
Wireless WA-50-t and WA-50-r (the PRODUCT) for one (1) 
year from the date of purchase.
This warranty covers all defects in material and workmanship 
with the following specific exceptions. These are:



  Damage caused by improper 

installation or adjustment



 Damage caused by acci-

dent, unreasonable use or 
neglect



 Damage from failure to fol-

low instructions contained 
in this Instruction Manual



 Damage occurring during 

shipment



 Damage from the per-

formance of repairs by 
someone not authorized by 
Atlantic Technology



 Any unit on which the serial 

number has been effaced, 
modified, or removed



 Units which have been al-

tered or modified in design, 
appearance or construc-
tion.

This warranty covers only the actual defects within the PROD-
UCT itself. IT DOES NOT cover costs of installation in (or 
removal from) a fixed installation, or normal setup, claims 
based on any misrepresentation by the seller, or performance 
variations resulting from installation related circumstances 
such as signal quality, AC power or incompatibilities with 
speakers and/or other system components.
During the warranty period, Atlantic Technology will, at its 
option, either repair the defect, or replace the defective prod-
uct, or the defective parts, or components thereof at no charge 
to the owner for parts and labor covered by this warranty If 
necessary repairs are not covered by this warranty, or if a unit is 
examined which is not in need of repair, you will be charged for 
the repairs and/or the examination. If non-warranted repairs 
are needed, we will notify you of the estimated cost and ask 
for your authorization to perform said repairs.
You must pay shipping charges incurred in getting your Prod-
uct to the factory. We will pay the return shipping charges if 
the repairs are covered by the warranty. Please save the original 
shipping cartons, as the unit MUST be returned in the origi-
nal carton and packing. (Replacement cartons are available at 
a modest charge.)

Your WA-50 Wireless Audio System ships with this Instruction 
Manual and the following items:

Wireless Receiver

Wireless Transmitter

NOTE: Please contact customer service if any of these items are missing.



  Read these instructions.



  Keep these instructions.



  Heed all warnings.



  Follow all instructions.



  Do not use this apparatus near 

water.



  Clean only with dry cloth.



 Do not block any ventilation 

openings. Install in accordance 
with the manufacturer’s in-
structions.



 Do not install near any heat 

sources such as radiators, heat 
registers, stoves, or other ap-
paratus that produce heat.



  Protect the power cord from be-

ing walked on or pinched par-
ticularly at plugs, convenience 
receptacles, and the point where 
they exit from the apparatus.



 Only use attachments/acces-

sories specified by the manu-
facturer.



 Unplug this apparatus during 

lighting storms or when unused 
for long periods of time.



 Refer all servicing to qualified 

services personnel. Servicing 

is required when the apparatus 
has been damaged in any way, 
such as power-supply cord or 
plug is damaged, liquid has 
been spilled or objects have 
fallen into the apparatus, the 
apparatus has been exposed 
to rain or moisture, does not 
operate normally, or has been 
dropped.



  Adjust only those controls that 

are covered by the operating 
instructions as an improper 
adjustment of other controls 
may result in damage and will 
often require extensive work by 
a qualified technician to restore 
the apparatus to its normal 
operation



  Damage Requiring Service

  Unplug the apparatus from the 

wall outlet and refer servicing 
to qualified service personnel 
under the following conditions: 
When the power-supply cord or 
plug is damaged; If liquid has 
been spilled, or objects have 
fallen into the apparatus; If the 
apparatus has been exposed to 
rain or water; If the apparatus 
does not operate normally by 

following the operating instruc-
tions; If the apparatus has been 
dropped or damaged in any 
way, and; When the apparatus 
exhibits a distinct change in 
performance this indicates a 
need for service.



  Object and Liquid Entry

  Never push objects of any kind 

into the apparatus through 
openings as they may touch 
dangerous voltage points or 
short-out parts that could result 
in a fire or electric shock. The 
apparatus shall not be exposed 
to dripping or splashing and no 
objects filled with liquids, such 
as vases shall be placed on the 
apparatus. Don’t put candles or 
other burning objects on top of 
this unit.



  This device has no power switch. 

To disconnect this device from 
power supply, the power cord 
must be disconnected.



 The power supply and power 

cord for this apparatus is in-
tended for indoor use only.



  Only use the included A/C adap-

tor.

Once your subwoofer is set up, you should have many years of maintenance free enjoy-
ment from your system. However, if you should encounter a problem, refer to the fol-
lowing guide to help you find the solution. If a problem persists, you should contact 
your local authorized Atlantic Technology dealer.

  

 

WA-50-t and/or WA-50-r 
are connected but Status 
LED does not light up

a.

Make sure both transmitter and receiver are con-
nected to a power supply

b.

USB 2.0 connection on receiver or processor is being 
used for power 

c.

Switch to supplied USB AC Adapter

No Wireless Connection 
(WA-50-t and WA-50-r 
Status lights are “Red”)

a.

Make sure your WA-50-t and WA-50-r are both set 
to the same “Zone”

b.

WA-50-r may be out of range. Try moving the 
receiver closer

Your WA-50-t and WA-
50-r are connected, but 
no audio occurs

a.

Ensure that your source components are function-
ing properly

b.

Ensure that the audio levels are configured for au-
dible output (volume at source and/or destination 
may be muted or turned too low)

c.

If source component is computer, be sure the USB 
Headset is still listed as Default Playback Device (See 
PC and MAC configuration)