Eagle Electronics 320C Benutzerhandbuch

75

decrease the sensitivity to a level that eliminates the clutter. When you
turn HyperScroll off, you can return to your original sensitivity level.

Ping Speed Control Bar at default setting.

To change Ping Speed:
1. From the Sonar Page, press 

|

↓ to 

|

.

2. The Ping Speed Control Bar appears. Press 

↑ to increase ping speed;

press 

↓ to decrease ping speed. When it's set at the desired level, press

.

To adjust Sensitivity:
1. From the Sonar Page, press 

|

.

2. The Sensitivity Control Bar appears. Press 

↓ to decrease sensitivity;

press 

↑ to increase sensitivity. When it's set at the desired level, press

. (When you reach the maximum or minimum limit, a tone sounds.)

To turn off HyperScroll:
1. From the Sonar Page, press 

|

↓ to 

|

.

2. The Ping Speed Control Bar appears. Press 

↓ to decrease ping speed

to 50 percent. When it's set at the desired level, press 

.

When you boost ping speed and switch into HyperScroll, the width of
the FasTrack bar graph display doubles in width at the right side of the
screen. This allows you to better see the virtually instantaneous sonar