Edirol UA-20 Benutzerhandbuch
64
UA-20 application guide
Using ASIO Direct Monitor
If you are using the UA-20 from an ASIO2.0-compatible application in
Advanced
mode
, the UA-20’s
Input monitor switch
can be controlled automatically from the
application.
1
As described in
”
,
open the
“Driver Settings”
dialog box.
2
Make the following settings.
Check the
“Use ASIO Direct Monitor”
check box.
3
Click [OK] to close the driver settings dialog box.
* Depending on your application, there may also be an ASIO Direct Monitor setting among the
audio settings of your application. For details, refer to the operation manual for your
application.
application.
* When using ASIO Direct Monitor, monitoring may switch on/off at unexpected times,
depending on the application settings and on the recording procedure. If this occurs, uncheck
the check box in
the check box in
step 2
to disable ASIO Direct Monitor.