AUVI Technologies MSW1150 Benutzerhandbuch

-  This unit is equipped with a USB socket which can accept and play MP3 files stored on standard USB flash  
    drives which are for memory storage.  This unit is compatible with USB version 1.1 & 2.0.
-  This unit is equipped with a SD card slot which can accept and play MP3 files stored on standard SD cards 
    which are for memory storage.
-  The USB and SD card sockets are located on the side of the unit as shown in the picture below.
-  To utilize USB drives/SD cards for MP3-playback, insert the USB drive or SD card into the appropriate socket 
    (as shown below) and press the USB/SD key repeatedly until the display shows “USB read” or “SD read” 
    (depending on which one you are using).
-  Press Next or Back key to skip forward or backwards to select the desired MP3 file on the USB flash drive or 
    SD card.
-  Press the Play key to start the selected song.

Remember to press and hold the Find key for 3 seconds to turn on the Text Display Mode.  This enables the 
ID3 Tag to display onto the LCD display screen.

Important: Always turn off the unit or change 
mode to “CD” or “Radio” before removing a USB 
flash drive or SD card to prevent damage to your 
USB device or memory card.

Note: Although this product is fully compatible 
with USB 1.1 and 2.0, and SD card standard formats, 
a small percentage (about 5%) of USB flash drives 
and SD cards might not be readable due to those 
device manufacturers, not-compliant with the full 
(official) USB and SD card standards.

17