Plantronics 925 Benutzerhandbuch
2
3
en
Option C: Using the Charging Case
Open the cover of the case. Align the charging jack on the earpiece with
the micro USB connection in the case. Gently push the earpiece onto
the micro USB connection until you feel it click into place.
the micro USB connection in the case. Gently push the earpiece onto
the micro USB connection until you feel it click into place.
iMPoRtAnt
Incorrect removal of the earpiece from the case will
damage the micro USB port in the case. To properly remove the
earpiece, use your thumb to gently push the earpiece in a diagonal,
not vertical, direction away from the micro USB connector.
earpiece, use your thumb to gently push the earpiece in a diagonal,
not vertical, direction away from the micro USB connector.
Checking the Battery Level of Your Earpiece
With the earpiece on, simultaneously press and hold the call control
button and the volume button for about 2 seconds. The indicator light
flashes red to show the charge level.
button and the volume button for about 2 seconds. The indicator light
flashes red to show the charge level.
Charging Your earpiece
2
Charge indiCator lightS
red Flashes
Battery level
1
Full battery
2
1/3 to 2/3 full
3
less than 1/3 full
Volume Button
Call Control Button
The charging case provides one full charge to your earpiece before the
battery within the case requires charging. While the case is charging,
the indicator light on the bottom of the case flashes red. When fully
charged, the indicator turns off.
battery within the case requires charging. While the case is charging,
the indicator light on the bottom of the case flashes red. When fully
charged, the indicator turns off.
Recharging the Charging Case
1
to check the battery status of the charging case, you must
connect the earpiece to the case.
connect the earpiece to the case.
If the earpiece does not begin charging mode (indicator light slowly
flashes red) then both the earpiece and case need recharging.
flashes red) then both the earpiece and case need recharging.
2
Plug either the AC charger or the USB charger to power
source before connecting to the charging jack on the bottom
of the case.
If you disconnect the power source from the case after 10 minutes of
charging you must then wait at least 60 minutes before reconnecting
a power source to resume the charging cycle.
source before connecting to the charging jack on the bottom
of the case.
If you disconnect the power source from the case after 10 minutes of
charging you must then wait at least 60 minutes before reconnecting
a power source to resume the charging cycle.
note
If recharging with the AC charger, the charging case will feel
warm to the touch during the charging cycle. Once fully charged, the
case will cool down. See “Safety Information” on page 16 for more
information.
case will cool down. See “Safety Information” on page 16 for more
information.
1
Charging Your earpiece
Indicator Light
Charging Jack
Charging time
3 hours ..... Full charge using
charging case
1 hour ....... minimum charge
before first use
Charging time
9 hours .... Full charge
using USB
3 hours .... Full charge
using aC