Plantronics 925 Benutzerhandbuch

10

11

 

Light 

Tone

Incoming call

3 blue flashes every 2 seconds

3 rapid low tones 
every 2 seconds

Answer call

1 blue flash

1 low tone

Call in progress

1 blue flash every 2 seconds

None

Volume up or 
down

1 blue flash for each volume 
adjustment

1 tone with volume 
corresponding to 
volume level
2 low tones to 
indicate maximum 
volume level 
reached

End call

1 blue flash

1 low tone

Missed call

3 purple flashes every 10 
seconds for 5 minutes

None

Out of range

None

1 high tone

Back in range

Flashes to match current 
earpiece state

1 low tone

Turning on 
multipoint

2 blue flashes

None

Turning off 
multipoint

1 blue flash

None

By default, the online indicator is turned on. To turn off the online 

indicator, see “Earpiece Controls” on page 8.

My earpiece  
does not work  
with my phone.

Make sure the earpiece is fully charged.
Make sure earpiece is paired with the Bluetooth 
phone you are trying to use.
See “Pairing Your Earpiece” on page 4.

My phone did not 
locate the earpiece.

Turn both your phone and earpiece off and on, 
and then repeat the pairing process on page 4.

I could not enter  
my PIN code.

Turn both your phone and earpiece off and on, 
and then repeat the pairing process on page 4. 

Your PIN code, or Passkey, is 0000.

I cannot hear  
caller/dial tone.

The earpiece is not turned on. Press the call 
control button for approximately 2 seconds until 
you hear a tone or see the indicator glow blue.
Your earpiece is out of range. Move the earpiece 
closer to the Bluetooth phone.
Your earpiece battery is drained. Charge your 
battery. See “Charging Your Earpiece” on page 1.
The listening volume is too low. Incremental 
tapping of the volume button will adjust volume. 
See instructions for adjusting the volume in 
“Earpiece Controls” on page 8.
Make sure that the eartip fits properly. See 
“Adjusting the Fit” on page 6.