Clarion M455A Benutzerhandbuch

M455A

280-8402-00

• B-BOOST

: bass emphasized

• IMPACT

: bass and treble

emphasized

• EXCITE

: bass and treble

emphasized mid de-
emphasized

• CUSTOM

: user custom

• Z+ OFF

: no sound effect

1. Press the [Z+] button and select the Z-

Enhancer Plus mode to adjust.

2. Press the [A-M] button and turning the

[ROTARY] knob clockwise adjusts in the +
direction; turning it counterclockwise adjusts
in the – direction.
●When “B-BST 0” is selected, you can adjust

the bass in the range of –3 to 3.

●When “IMPACT 0” is selected, you can ad-

just the bass and treble in the range of –3 to
3.

●When “EXCITE 0” is selected, you can adjust

the bass and treble in the range of –3 to 3.

●When “CUSTOM” mode is selected, bass

gain, frequency and Q-curve, and treble gain
and frequency can be adjusted.

∗ Press and hold the [Z+] button for 1 second or

longer, then the setting parameter of bass/
treble will be initialized with a display
“Z+FLAT”.

Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes as following order:
●When “B-BOOST” is set

➜ “B-BOOST” ➜ “BAL 0” ➜

➜ Last function mode.

●When “IMPACT” is set

➜ “IMPACT” ➜ “BAL 0” ➜

➜ Last function mode.

●When “EXCITE” is set

➜ “EXCITE” ➜ “BAL 0” ➜

➜ Last function mode.

●When “CUSTOM” is set

➜ “BASS” ➜ “TREBLE” ➜

➜ “FAD 0” ➜ Last function mode.

●When “Z+ OFF” is set

➜ “BAL 0” ➜ “FAD 0” ➜ Last

Note:
• If the rear line level output is set to the full range

“REAR” setting, “S-VOL” will not be shown as a
selection.

This adjustment can be performed when the
Z-Enhancer Plus is set to “CUSTOM”.

1. Press the [A-M] button and select “BASS”.

2. Turning the [ROTARY] knob clockwise

emphasizes the bass; turning it
counterclockwise attenuates the bass.
∗ The factory default setting is “B<G 0>”.

(Adjustment range:  –6 to +6)

3. Press the [

å] or [∂] button to select

“B<F 60>”.

Turn the [ROTARY] knob to select the
frequency.
∗ The factory default setting is “B<F 60>”.

(Adjustment 60/100/200 Hz)

4. Press the [

å] or [∂] button to select

“B<Q 1>”.

Turn the [ROTARY] knob to select the Q-
curve.
∗ The factory default setting is “B<Q 1>”.

(Adjustment 1/1.25/1.5/2)

5. When the adjustment is complete, press the

[A-M] button several times until the function
mode is reached.

This adjustment can be performed when the Z-
Enhancer Plus is set to “CUSTOM”.

1. Press the [A-M] button and select “TREBLE”.

2. Turning the [ROTARY] knob clockwise

emphasizes the treble; turning it
counterclockwise attenuates the treble.
∗ The factory default setting is “T<G 0>”.

(Adjustment range:  –6 to +6)

3. Press the [

å] or [∂] button to select

“T<F 10>”.

Turn the [ROTARY] knob to select the
frequency.
∗ The factory default setting is “T<F 10>”.

(Adjustment 10 kHz/15 kHz)

4. When the adjustment is complete, press the

[A-M] button several times until the function
mode is reached.