Clarion XA311 Benutzerhandbuch
8
English
XA311
FM Reception
For enhanced FM performance the
®
tuner includes signal actuated stereo control
and Multipath noise reduction circuits.
Listening to the Radio
1) Press the FUNC button
5
to select the radio
mode. The radio turns on.
2) To tune to a desired preset station, first press
the BAND button
6
and select FM1, FM2,
FM3, FM4 or AM.
The band changes as follows each time the
BAND button is pressed:
FM1
The band changes as follows each time the
BAND button is pressed:
FM1
➜
FM2
➜
FM3
➜
FM4
➜
AM
➜
FM1
3) Use the corresponding Preset buttons
*
to
select the desired station.
Seek Tuning
1) Press the BAND button
6
and select the
desired band.
2) Press the Up or Down buttons
1
to seek up
or down the frequency band. Seek tuning
automatically stops when a station is found.
automatically stops when a station is found.
Manual Tuning
1) Press the BAND button
6
to select the
desired band.
2) Press and hold the BAND button for more
than 2 seconds. “MANU” is illuminated on
the display and the manual tuning mode is
selected.
the display and the manual tuning mode is
selected.
3) Use the Up and Down buttons
1
to manual-
ly tune up or down the desired frequency
band.
band.
Presetting Stations
A total of 25 stations can be preset, 5 each for
the FM1, FM2, FM3, FM4 and AM bands.
the FM1, FM2, FM3, FM4 and AM bands.
Note:
•
When a station is preset, the station previously stored
in the memory at that position is cleared.
in the memory at that position is cleared.
Presetting stations manually
1) Press the BAND button
6
to select the band
at which to store the station.
2) Use the Up and Down buttons
1
to tune in
the station to be preset.
3) Press and hold the corresponding Preset
button
*
for at least 2 seconds to store the
station into memory.
Auto store function (Automatic Station
Store)
Store)
1) Press the BAND button
6
to select the band
at which to store the stations.
2) Press and hold the AS button
8
for at least
2 seconds. Stations with good reception are
automatically stored at preset to the five but-
tons
automatically stored at preset to the five but-
tons
*
1 to 5.
*
If there are fewer than 5 stations with good recep-
tion, the stations previously stored at the remain-
ing buttons are not cleared.
tion, the stations previously stored at the remain-
ing buttons are not cleared.
Preset Scanning (Preset Station Scan)
When the PS button
8
is pressed, the preset
memory numbers flash and the stations are
tuned in for 7 seconds each in the order in which
they were stored. Press the PS button again to
cancel the preset scanning mode.
tuned in for 7 seconds each in the order in which
they were stored. Press the PS button again to
cancel the preset scanning mode.
Note:
•
The auto store mode is set if the PS button is pressed
for more than 2 seconds.
for more than 2 seconds.
Radio Operation