Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Denon
  4. RCD-N7
  5. Benutzerhandbuch

Denon RCD-N7 Benutzerhandbuch

Download
Seite von 58
29
Getting Started
Connections
Basic Operations
Advanced Operations
Advanced Operations
Troubleshooting
Explanation terms
Information
Specifi
 cations
Index
ENGLISH
  
Adjusting the clock automatically
 
[Clock]
You can automatically adjust the clock of this unit using the Internet.
To use this function, the unit must be connected to the Internet. 
 Setting the Time Zone
Use the following procedure to select your local standard time (time 
zone).
1
Press 
[MENU]
.
Turns on the Menu settings mode and the Menu appears on 
the display. (vpage 27 “Menu map”)
2
Use 
ui
 to select “Clock” – “Auto Adjust” – “Time 
Zone”, then press 
[ENTER]
, 
<
1
/
3
  ENTER>
 or 
p
.
“Time Zone” menu appears.
3
Use 
ui
 to select your time zone, then press 
[ENTER]
, 
<
1
/
3
  ENTER>
 or 
p
.
The setting is entered.
 Setting the Summer Time
Use the following procedure to set Summer time if the Summer time 
system is used in your country.
1
Press 
[MENU]
.
Turns on the Menu settings mode and the Menu appears on 
the display. (vpage 27 “Menu map”)
2
Use 
ui
 to select “Clock” – “Auto Adjust” – 
“Summer Time”, then press 
[ENTER]
, 
<
1
/
3
  
ENTER>
 or 
p
.
“Summer Time” menu appears.
3
Use 
ui
 to select “Off (0H)” or “On (+1H)”, then 
press 
[ENTER]
, 
<
1
/
3
  ENTER>
 or 
p
.
The setting is entered.
 Auto  Adjust
Use the following procedure to automatically adjust the clock.
1
Press 
[MENU]
.
Turns on the Menu settings mode and the Menu appears on 
the display. (vpage 27 “Menu map”)
2
Use 
ui
 to select “Clock” – “Auto Adjust” – 
“Adjust Now”, then press 
[ENTER]
, 
<
1
/
3
  ENTER>
 
or 
p
.
The operation to receive the current time starts.
• The current time is displayed for several seconds when it is received 
successfully.
• If the current time is not received successfully, “Connection Failed” 
appears.
  Setting the current time (Manual Adjust) 
(12-Hour Display)
1
Press 
[MENU]
.
Turns on the Menu settings mode and the Menu appears on the 
display. (vpage 27 “Menu map”)
2
Use 
ui
 to select “Clock” – “Manual Adjust”, then 
press 
[ENTER]
, 
<
1
/
3
  ENTER>
 or 
p
.
3
Use 
ui
 to set the “hours”. 
4
Press 
[ENTER]
, 
<
1
/
3
  ENTER>
 or 
p
.
5
Use 
ui
 to set the “minutes”.
6
Press 
[ENTER]
, 
<
1
/
3
  ENTER>
 or 
p
.
The current time is set.
 
n  Checking the current time when the power is on
Press 
[CLOCK]
.
Press once more and the display returns to its original condition.
 
n Checking the current time when the power is 
set to standby
Press 
[CLOCK]
.
The current time is displayed for 30 seconds.
NOTE
The time cannot be set when in the standby mode. Turn on the power 
fi rst.
 
1.RCDN7E3_ENG_008.indd   29
1.RCDN7E3_ENG_008.indd   29
2010/09/03   11:11:50
2010/09/03   11:11:50