JVC KD-G126 Benutzerhandbuch

ENGLISH

12

•  Sound cannot be heard from the 

speakers.

•  Adjust the volume to the optimum level.
•  Check the cords and connections.

•  This unit does not work at all.

Reset the unit (see page 2).

•  SSM automatic presetting does not 

work.

Store stations manually.

•  Static noise while listening to the 

radio.

Connect the antenna firmly.

•  Disc automatically ejects.

Insert the disc correctly.

•  CD-R/CD-RW cannot be played 

back.

•  Tracks on the CD-R/CD-RW cannot 

be skipped.

•  Insert a finalized CD-R/CD-RW.
•  Finalize the CD-R/CD-RW with the component 

which you used for recording.

•  Disc can be neither played back nor 

ejected.

•  Unlock the disc (see page 7).
•  Eject the disc forcibly (see page 2).

•  Disc sound is sometimes interrupted.

•  Stop playback while driving on rough roads.
•  Change the disc.
•  Check the cords and connections.

•  “NO DISC” appears on the display.

Insert a playable disc into the loading slot.

What appears to be trouble is not always serious. Check the following points before calling a service 
center.

•  If the ejected disc is not removed within 

15 seconds, the disc is automatically inserted 
again into the loading slot to protect it from 
dust. (Disc will not play this time.)

•  If you change the “AMP GAIN” setting from 

“HIGH PWR” to “LOW PWR” while the 
volume level is set higher than “VOL 30,” the 
unit automatically changes the volume level to 
“VOL 30.”

EN10-13_KD-G125_126[UN]f.indd   12

10/4/05   11:56:00 AM