Jensen CD1211 Benutzerhandbuch

CD1211

10

Press BAND (5) during radio play to switch 
between three FM bands and one AM band. 
“F1”, “F2”, “F3” or “AM” will appear in the 
display to indicate the band currently selected.

Automatic Tuning
Press the Up Tuning (14) button to tune upward 
in frequency and the Down Tuning (13) button 
to tune downward in frequency. The unit will 
automatically stop at the next strong station. If 
the Local mode is active, the radio will seek the 
next strong local station when either button is 
pressed.
Manual Tuning
Press the Up Tuning (14) or Down Tuning (13) 
button for more than two seconds to select 
manual tuning mode. “MANUAL” will appear in 
the display. Press the Up or Down Tuning 
buttons to move radio frequency up or down 
two digits at a time. Press and hold the Up or 
Down Tuning buttons to quickly advance to a 
certain frequency. Release when the desired 
frequency is reached. If tuning is not adjusted 
within five seconds of entering manual tuning 
mode, the radio will revert to automatic tuning 
and “AUTO” will appear in the display.

Press SCAN (15) to scan upwards through all 
the strong channels in the current band. The 
unit will pause and play each station for five 
seconds, and the station frequency will flash in 
the display during this time. Press SCAN again 
to stop scanning and listen to the current 
station. 

Up to six stations on each band can be stored 
as presets and can then be instantly recalled by 
pressing the associated preset button on the 
front panel (16) or remote control. To store a 
station, turn the radio on and select the desired 
band and station. Press and hold the desired 
preset button (numbered one through six on the 
face of the radio or remote control) for more 
than two seconds. When stored, the preset 
number will appear in the display. The station is 
now stored and can be recalled at any time by 
pressing the corresponding preset button. 

/

TUNE

CD1211 CD RECEIVER

SCAN

MONO

EQ

AUX IN