RCA RRB1302-A Benutzerhandbuch

Seite von 20
16
1
 SEARCH 
¡
4
 ASMS 
¢
RANDOM
DISC
DISC
SET
0
TRACK
SET
7
8
9
4
5
6
1
2
3
DISPLAY
HI-LITE
POWER
BEST
PREVIOUS
MODE
CLEAR
PROGRAM
REPEAT
7
8
3
2
3
(HI-LITE scan)
• The operation is available only from the remote control.
This function plays a 10 second portion located 1 minute
from the start of each track on all the discs in the current
play mode.
<Disc scan>
Press 
HI-LITE
 during either
play or stop mode.
• The changer plays a 10
second portion located 1
minute into the first track of
each CD, starting from the
first CD.
The 
DISC
 and 
SCAN
 indicator
blinks.
<Track scan>
Press 
HI-LITE
 twice during
either play or stop mode.
• The changer plays a 10
second portion located 1
minute into each track of
each CD, starting from the
first CD.
The 
SCAN
 indicator blinks.
<Program scan>
Press 
HI-LITE
 during program
mode.
• The changer plays a 10
second portion located 1
minute into each track in the
program.
The 
SCAN
 indicator blinks.
<Best selection memory scan>
Press 
HI-LITE
 during best
selection memory playback.
• The changer plays a 10
second portion located 1
minute into each track in the
best selection memory.
The 
SCAN
 indicator blinks.
Press twice
Press once
Press once
HI-LITE
3
HI-LITE
HI-LITE
HI-LITE
HI-LITE
Press once
<Programming a pause (remote control only)>
(Pause program)
If you press 
8 at Step      , you can program a pause. When
you press 
8, 
PA
 appears in the display instead of the disc
number.
• For example, when making a program for recording both
sides of a cassette tape, press 
8 to insert a pause after
programming the tracks for one side. After turning the
tape over, press 
8 to resume recording.
Notes:
• You cannot program a pause as the first step, nor
program two pauses in a row.
• When you program a pause, it counts as one step and
reduces the total number of tracks you can program.
• To erase a program...
Press 
7 twice during playback (or once in stop mode).
You can also erase the program by pressing 
MODE
,
RANDOM
PREVIOUS
, or 
SINGLE LOADER PLAY
 in
either play or stop mode (or by pressing 
BEST
 in stop
mode).
• To cancel a program step
In stop mode, each time you press 
CLEAR
, the last step
in the program is erased.
• If a programmed disc is missing or inserted backwards
during program play, 
NO DISC
 appears in the
display, the step is automatically erased, and playback
proceeds to the next step.
• Program contents are stored in memory even when
the power is turned off.
• Press 
DISPLAY
 twice to check the number of steps that
have been programmed.
DISC
TRACK
MIN
SEC
PGM
Notes:
• If Step       is carried out before the accumulated time is
displayed, the program play starts and the time is not
displayed.
• When 
UNLOAD
 is pressed while a program has been
entered, the disc for the 1st program step comes on the
center position and the hood opens.
• The display is not shown if the total time of the program
is 100 minutes or more.
5
4
This Indicates the Number of
Programmed Steps.