RCA ANT1275F QSG 00 Merkblatt

DO NOT RETURN this product to the store! Please call our 

toll-free help line at 1-800-768-1969 or visit RCAAntennas.net

Note: If your TV’s antenna input 

is already connected to a satellite 

receiver, cable box, or digital 

converter, connect the antenna’s 

coaxial cable to the antenna input 

jack on that device.

ANT1275F Amplified Indoor Antenna

Insert the power adapter into the 

antenna’s DC jack. Plug the other end 

into a wall outlet or power strip.

Different channels may require different antenna 

adjustments. If you find that you’re not receiving 

channels you normally receive, try the following 

adjustments in the order listed here:

> Extend the antenna’s dipoles (rods) and rotate them 

until you get the best picture. (Depending on the 

channel’s frequency, this may or may not have any 

effect.) 

> Try the channel without the antenna’s amplifier—set 

the amplifier on/off switch on the antenna’s back 

panel to OFF. (Don’t forget to turn the amplifier back 

on for other channels!)

> Rotate the base of the antenna until you get the best 

picture. (Don’t forget to move it back to its original 

position for the other channels.)

Check out setup videos at

Out to TV

DC

Set the amplifier on/off switch (on the 

antenna’s back panel) to ON.

Amplifier On/Off switch

TV antennas perform 

best when pointed in 

the direction of the 

broadcaster’s tower.

For help finding your local 

broadcast towers, go to 

www.RCAAntennas.net

 

Most TVs have a channel scan option in their menu 

system, many times in a SETUP or CHANNEL menu 

under ANTENNA. 

For detailed instructions on performing a channel scan, 

see the owner’s manual that came with your TV.

ANT1275F QSG 00