Sony CDX-F5510 Benutzerhandbuch
10
CDX-F5510/F50M
2-515-314-11 (1)
H:\Data Disk\2515314111\251531411CDXF5510CDXF50MU\01US02CD-U.fm
masterpage:Left
Repeat steps 2 and 3 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
With the card remote commander
In step 3, to adjust the selected item, press
In step 3, to adjust the selected item, press
<
,
M
,
,
or
m
.
Labeling a station/disc
When you receive a station, or play a disc in a
CD changer with the CUSTOM FILE function,
you can label each station/disc with a custom
name up to 8 characters (Station Memo/Disc
Memo).
If you label a station/disc, the name appears on
the list (page 9 or 11).
CD changer with the CUSTOM FILE function,
you can label each station/disc with a custom
name up to 8 characters (Station Memo/Disc
Memo).
If you label a station/disc, the name appears on
the list (page 9 or 11).
1
While receiving a station or playing a
disc that you want to label, press and
hold
disc that you want to label, press and
hold
(LIST)
.
2
Rotate the volume control dial
repeatedly until the desired character
appears.
repeatedly until the desired character
appears.
The character changes as follows:
A
y
B
y
C
...
y
0
y
1
y
2
...
y
+
y
–
y
...
y
(blank
space)
y
A
To move the digital indication, press the
select button.
Repeat this operation until the entire name is
entered.
select button.
Repeat this operation until the entire name is
entered.
3
Press and hold
(LIST)
.
The labeling is complete and the display
returns to normal play/reception mode.
returns to normal play/reception mode.
To display the name, press (DSPL) during
reception or playback.
reception or playback.
Tips
• To correct or erase a character, overwrite or enter
• To correct or erase a character, overwrite or enter
“
.”
• The Disc Memo always takes priority over any
prerecorded title.
• You can label a disc on the unit if a changer with the
CUSTOM FILE function is connected.
• “REP-TRACK” and all shuffle play are suspended
until the labeling is complete.
With the card remote commander
In step 2, to select the character, press
In step 2, to select the character, press
M
or
m
.
Deleting the custom name
1
Select the radio, or the unit that has stored the
custom name you want to delete, then press
and hold (LIST).
custom name you want to delete, then press
and hold (LIST).
2
Press and hold (DSPL).
The stored name will flash.
The stored name will flash.
3
Rotate the volume control dial repeatedly to
select the name you want to delete.
select the name you want to delete.
4
Press and hold the select button.
The name is deleted. Repeat steps 3 and 4 to
delete other names.
The name is deleted. Repeat steps 3 and 4 to
delete other names.
5
Press and hold (LIST).
The unit returns to normal play/reception
mode.
The unit returns to normal play/reception
mode.
With the card remote commander
In step 3, to select the name, press
In step 3, to select the name, press
M
or
m
.
Adjusting setup items
— SET
— SET
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until the desired item appears.
until the desired item appears.
3
Rotate the volume control dial to
select the setting (example “ON” or
“OFF”).
select the setting (example “ON” or
“OFF”).
4
Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
Displayed items will differ, depending on the source
and setting.
With the card remote commander
In step 3, to select the setting, press
In step 3, to select the setting, press
<
or
,
.
The following items can be set (follow the page
reference for details):
“
reference for details):
“
z
” indicates the default settings.
CLOCK-ADJ
(Clock Adjust)
BEEP
To set “ON” (
z
) or “OFF.”
AUX-A
*
1
*
2
To turn the AUX source display
“ON” (
“ON” (
z
) or “OFF” (page 13).
SUB/REAR
*
1
To switch the audio output.
– “SUB” (
– “SUB” (
z
): to output to a
subwoofer.
– “REAR”: to output to a power
amplifier.